Hi, I've several dictionaries in tabfile that I want to convert in mobi in a mobi dictionary. How can I do?
↧
TABfiles conversion
↧
Any hope of seeing a Jailbreak for recent FW versions?
There are many angles of attack in the kindle devices.
My bet is that there are plenty of bugs and glitches in the web browser, the PDF reader and many other exploits to be discovered in the software.
Is there a good chance of something being discovered?
What kind of exploits did the previous jailbreaks rely on?
My bet is that there are plenty of bugs and glitches in the web browser, the PDF reader and many other exploits to be discovered in the software.
Is there a good chance of something being discovered?
What kind of exploits did the previous jailbreaks rely on?
↧
↧
KT3 (G900K9) with fw 5.8.10 downgrade success
Hey guys, today i bought a kindle KT3, it came with firmware 5.8.10. Haven't activated or connected it to wifi. I followed this wiki page https://wiki.mobileread.com/wiki/5_x_Jailbreak and installed factory fw, it installed normally and after that i ran universal jailbreak and everything worked out fine. I'm now proudly jailbroken. Just wanted to report my success, thank you all
↧
Kindle DX Book list
Hello All.:)
I have a Kindle DX and a while back ......the book I was reading always sat at the top of the books I would download, even if I selected to read another book that book would sit on top of the previous book I was reading and then all the books I had downloaded.
Now when I close a book and read another book, the books I have open and I am reading dart to the back of ALL of the books list!:blink:
To find the open book again means I have to scroll all the way to the back of the Kindles book list (20 pages??):(
Would anybody know why this might of changed?
I have a Kindle DX and a while back ......the book I was reading always sat at the top of the books I would download, even if I selected to read another book that book would sit on top of the previous book I was reading and then all the books I had downloaded.
Now when I close a book and read another book, the books I have open and I am reading dart to the back of ALL of the books list!:blink:
To find the open book again means I have to scroll all the way to the back of the Kindles book list (20 pages??):(
Would anybody know why this might of changed?
↧
Kindle PW, Application Error, The selected application could not be started
my kindle paperwhite didnot launch koreader of selecting .pdf, .epub books, and give error as given below.
"Application Error, The selected application could not be started, Please try again."
OBSERVATIONS
After much of research i find out following observations.
1. Set was off due to battery low, after recharging it come alive.
2. when i open folder extensions/KUAL.cfg file i find out this
"# KUAL.cfg - created on Fri Nov 1 00:59:35 UTC 2013"
3. I tried to register set but it didnot registered on amazon website.
4. From menu, "Sync and Check for Items" was grayed out, so we cannot synchronize our device date etc.
4. When i tried my kindle DXG, also off due to battery low, recharge, its KUAL did not launched.
5. When i check date, it what 1970.
CONCLUSION
It seems due to date issue some how KUAL fail to integrate file with koreader, or itself.
SOLUTION
If some how we update DATE it might solve this error.
FINAL WORDS
But did not find a way to update Date in Kindle Devices .
CAN ANYONE HELP TO FIND WAY OUT.
"Application Error, The selected application could not be started, Please try again."
OBSERVATIONS
After much of research i find out following observations.
1. Set was off due to battery low, after recharging it come alive.
2. when i open folder extensions/KUAL.cfg file i find out this
"# KUAL.cfg - created on Fri Nov 1 00:59:35 UTC 2013"
3. I tried to register set but it didnot registered on amazon website.
4. From menu, "Sync and Check for Items" was grayed out, so we cannot synchronize our device date etc.
4. When i tried my kindle DXG, also off due to battery low, recharge, its KUAL did not launched.
5. When i check date, it what 1970.
CONCLUSION
It seems due to date issue some how KUAL fail to integrate file with koreader, or itself.
SOLUTION
If some how we update DATE it might solve this error.
FINAL WORDS
But did not find a way to update Date in Kindle Devices .
CAN ANYONE HELP TO FIND WAY OUT.
↧
↧
K2 Reginfo won't work on 3.2.1 modified K2i
I have recently bought a K2i that I just modified to run the 3.2.1 firmware. Since I've never been able to register a K2 that's been modified this way, (I am told it's a inherent flaw to this modified firmware,) I have tried repeatedly to use the reginfo hack in order to try and enable the Kindle to create collections. Every time I try it, the hack fails and I think it shows the error 007. I am hoping that there is a solution to my problem. I would appreciate someone's' help with this matter.
:help:
:help:
↧
Kindle PW3 struck
Hello Guys,
My kindle started showing battery invalid issue suddenly. After going through this forum for quite sometime, I've decided to connect it with a serial connector and see.
To my luck, it connected to my pc and was showing this message. can somebody help me with this state ?
-----------
My kindle started showing battery invalid issue suddenly. After going through this forum for quite sometime, I've decided to connect it with a serial connector and see.
To my luck, it connected to my pc and was showing this message. can somebody help me with this state ?
-----------
Code:
uboot > bootm 0xE41000
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2634932 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.098608] boot: C def:bcut:batterycut=1
[ 0.286781] LPDDR2 MfgId: 0x5 [Nanya]
[ 0.290471]
[ 0.290474] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
[ 0.303012]
[ 0.303016] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
[ 0.311879]
[ 0.311883] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
[ 0.320224]
[ 0.320227] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.331005] max77696-adc max77696-adc.0: adc conversion timed out
[ 0.343326]
[ 0.343329] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.355688]
[ 0.355691] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.365327]
[ 0.365330] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.375806]
[ 0.375808] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.385691]
[ 0.385694] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
[ 0.396381] max77696-adc max77696-adc.0: adc conversion timed out
3.0.35-lab126 #1 PREEMPT Mon Jun 1 23:54:30 PDT 2015 armv7l
Press [ENTER] for recovery menu... 0 /
=== kernel printk buffer (20395 bytes) ===
<5>[ 0.000000] Linux version 3.0.35-lab126 (jenkins-official@sjc10-jbuild11) (collect2: error: ld returned 1 exit status) #1 PREEMPT Mon Jun 1 23:54:30 PDT 2015
<4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: Freescale i.MX 6SoloLite based Wario Board
<4>[ 0.000000] Ignoring unrecognised tag 0x54410011
<6>[ 0.000000] Will try to place printk log at 8fffc000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] CPU identified as i.MX6SoloLite, silicon rev 1.2
<7>[ 0.000000] On node 0 totalpages: 131072
<7>[ 0.000000] free_area_init_node: node 0, pgdat c054d6ac, node_mem_map c2000000
<7>[ 0.000000] DMA zone: 64 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 8128 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 960 pages used for memmap
<7>[ 0.000000] Normal zone: 121920 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
<5>[ 0.000000] Kernel command line: rootwait log_pos_goal=0x8fffc000 console=ttymxc0,115200 root=/dev/mmcblk0p2 ro ip=off quiet video=mxcepdcfb:E60,bpp=8,x_mem=3M
<4>[ 0.000000] Prink buffer will be relocated to physical address: 8fffc000
<6>[ 0.000000] log_buf_len: 32768
<6>[ 0.000000] early log buf free: 31269(95%)
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 512MB = 512MB total
<5>[ 0.000000] Memory: 514104k/514104k available, 10184k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
<5>[ 0.000000] vmalloc : 0xe0800000 - 0xf2000000 ( 280 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc013e000 (1240 kB)
<5>[ 0.000000] .text : 0xc013e000 - 0xc051a000 (3952 kB)
<5>[ 0.000000] .data : 0xc051a000 - 0xc054e1e0 ( 209 kB)
<5>[ 0.000000] .bss : 0xc054e204 - 0xc0573a80 ( 151 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:624
<6>[ 0.000000] MXC GPIO hardware
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] arm_max_freq=1GHz
<6>[ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
<6>[ 0.000000] bootconsole [ttymxc0] enabled
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000261] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
<6>[ 0.060124] pid_max: default: 32768 minimum: 301
<6>[ 0.060367] Mount-cache hash table entries: 512
<6>[ 0.060712] CPU: Testing write buffer coherency: ok
<6>[ 0.060857] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<6>[ 0.067962] print_constraints: dummy:
<6>[ 0.068129] NET: Registered protocol family 16
<6>[ 0.072605] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
<6>[ 0.072927] print_constraints: vddcore: 725 <--> 1300 mV at 1475 mV fast normal
<6>[ 0.073247] print_constraints: vddsoc: 725 <--> 1300 mV at 1475 mV fast normal
<6>[ 0.073572] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
<6>[ 0.073930] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
<6>[ 0.074269] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
<4>[ 0.076041] LAB126 Board id - 0670209161350K4V
<6>[ 0.080773] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.080787] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
<6>[ 0.080801] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.080819] L310 cache controller enabled
<6>[ 0.080830] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02030000, Cache size: 262144 B
<6>[ 0.090412] bio: create slab <bio-0> at 0
<6>[ 0.094571] max77696> regulator init
<6>[ 0.095583] spi_imx imx6q-ecspi.0: probed
<6>[ 0.095991] usbcore: registered new interface driver usbfs
<6>[ 0.096123] usbcore: registered new interface driver hub
<6>[ 0.096279] usbcore: registered new device driver usb
<4>[ 0.098577] Reboot Reason - Metric Framework Reporting
<6>[ 0.098593] kernel: kernel_metric_generic,0,counter,event_recorder,ercflags,MR_FRSTRT,1,
<4>[ 0.098601] Reboot Reason - Legacy Metric Reporting
<3>[ 0.098608] boot: C def:bcut:batterycut=1
<6>[ 0.104278] MAX77696 TOPSYS 1.0.0 Installed
<6>[ 0.107072] max77696-gpio max77696-gpio.0: gpio#0 -- -- func-0 in
<6>[ 0.108587] max77696-gpio max77696-gpio.0: gpio#1 -- -- func--1 in
<6>[ 0.110096] max77696-gpio max77696-gpio.0: gpio#3 -- -- func-0 in
<6>[ 0.112003] MAX77696 GPIO Driver 1.0.0 Installed
<4>[ 0.113339] buck mode: 4
<4>[ 0.114102] buck mode: 4
<6>[ 0.115074] print_constraints: max77696_buck1: 900 <--> 1300 mV at 1250 mV fast normal idle standby
<4>[ 0.115674] buck mode: 4
<6>[ 0.116654] print_constraints: max77696_buck1dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
<4>[ 0.117245] buck mode: 4
<4>[ 0.118007] buck mode: 4
<6>[ 0.118979] print_constraints: max77696_buck2: 900 <--> 1300 mV at 1200 mV fast normal idle standby
<4>[ 0.119541] buck mode: 4
<6>[ 0.120518] print_constraints: max77696_buck2dvs: 600 <--> 1300 mV at 900 mV fast normal idle standby
<6>[ 0.121092] print_constraints: max77696_buck3: 600 <--> 3387 mV at 1300 mV fast normal idle standby
<4>[ 0.121835] buck mode: 4
<4>[ 0.122597] buck mode: 4
<6>[ 0.123368] print_constraints: max77696_buck4: 1200 mV fast normal idle standby
<4>[ 0.123945] buck mode: 4
<6>[ 0.124925] print_constraints: max77696_buck5: 600 <--> 3387 mV at 1800 mV fast normal idle standby
<4>[ 0.125505] buck mode: 2
<6>[ 0.126481] print_constraints: max77696_buck6: 600 <--> 3387 mV at 3200 mV fast normal idle standby
<6>[ 0.126524] MAX77696 Buck Regulators Driver 1.0.1 Installed
<6>[ 0.127387] print_constraints: max77696_ldo1: 800 <--> 3950 mV at 3300 mV normal idle standby
<6>[ 0.127994] print_constraints: max77696_ldo2: 800 <--> 3950 mV at 3000 mV normal idle standby
<6>[ 0.128586] print_constraints: max77696_ldo3: 800 <--> 3950 mV at 2500 mV normal idle standby
<6>[ 0.129172] print_constraints: max77696_ldo4: 800 <--> 2375 mV at 1800 mV normal idle standby
<6>[ 0.129752] print_constraints: max77696_ldo5: 800 <--> 2375 mV at 1800 mV normal idle standby
<6>[ 0.130348] print_constraints: max77696_ldo6: 800 <--> 3950 mV at 3200 mV normal idle standby
<6>[ 0.130935] print_constraints: max77696_ldo7: 800 <--> 3950 mV at 3200 mV normal idle standby
<6>[ 0.131509] print_constraints: max77696_ldo8: 800 <--> 2375 mV at 1100 mV normal idle standby
<6>[ 0.132094] print_constraints: max77696_ldo9: 800 <--> 2375 mV at 1100 mV normal idle standby
<6>[ 0.132779] print_constraints: max77696_ldo10: 2400 <--> 5550 mV at 5200 mV normal idle standby
<6>[ 0.133599] MAX77696 Linear Regulators Driver 1.0.2 Installed
<6>[ 0.134311] print_constraints: max77696_lsw1:
<6>[ 0.134700] print_constraints: max77696_lsw2:
<6>[ 0.135050] print_constraints: max77696_lsw3:
<6>[ 0.135393] print_constraints: max77696_lsw4:
<6>[ 0.135436] MAX77696 Load Switches Driver 1.0.0 Installed
<6>[ 0.136710] print_constraints: max77696-display:
<6>[ 0.137507] print_constraints: max77696-vcom:
<6>[ 0.137872] print_constraints: max77696-vee:
<6>[ 0.138252] print_constraints: max77696-vneg:
<6>[ 0.138629] print_constraints: max77696-vpos:
<6>[ 0.138980] print_constraints: max77696-vddh:
<6>[ 0.140002]
<6>[ 0.140006] EPD vreg probe complete!
<6>[ 0.140633] print_constraints: max77696_vddq: 240 <--> 984 mV at 600 mV
<6>[ 0.140693] MAX77696 LPDDR2 Termination Supply Driver 1.0.1 Installed
<6>[ 0.142147] MAX77696 I2C Driver 1.0.0 Installed
<4>[ 0.145551] i2c-core: driver [max17135] using legacy suspend method
<4>[ 0.145562] i2c-core: driver [max17135] using legacy resume method
<6>[ 0.145596] Switching to clocksource mxc_timer1
<6>[ 0.158009] NET: Registered protocol family 2
<6>[ 0.158103] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.158290] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.158520] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.158662] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.158670] TCP reno registered
<6>[ 0.158680] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.158696] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.159008] NET: Registered protocol family 1
<6>[ 0.159216] RPC: Registered named UNIX socket transport module.
<6>[ 0.159227] RPC: Registered udp transport module.
<6>[ 0.159234] RPC: Registered tcp transport module.
<6>[ 0.159242] RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>[ 0.164088] etb: probe of etb failed with error -2
<4>[ 0.164397] etm: probe of etm.0 failed with error -2
<6>[ 0.164691] Static Power Management for Freescale i.MX6
<6>[ 0.164702] wait mode is enabled for i.MX6
<6>[ 0.164864] cpaddr = 0 suspend_iram_base=f2900000
<6>[ 0.164908] PM driver module loaded
<6>[ 0.165187] IMX usb wakeup probe
<7>[ 0.165210] the wakeup pdata is 0xde07d700
<6>[ 0.165575] IMX usb wakeup probe
<7>[ 0.165596] the wakeup pdata is 0xde07d880
<6>[ 0.165835] cpu regulator mode:ldo_bypass
<6>[ 0.166242] i.MXC CPU frequency driver
<6>[ 0.187308] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.188398] msgmni has been set to 1004
<6>[ 0.188885] io scheduler noop registered
<6>[ 0.188967] io scheduler cfq registered (default)
<6>[ 0.189445] MAX77696 Backlight Driver 1.0.0 Installed
<6>[ 0.190284] imx-sdma imx-sdma: loaded firmware 1.1
<6>[ 0.195188] imx-sdma imx-sdma: initialized
<6>[ 0.198059] Serial: IMX driver
<6>[ 0.198175] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
<6>[ 0.198204] console [ttymxc0] enabled, bootconsole disabled
<6>[ 0.202359] loop: module loaded
<6>[ 0.202620] MAX77696 32kHz Oscillator Driver 1.0.0 Installed
<6>[ 0.203243] input: max77696-onkey as /devices/platform/imx-i2c.0/i2c-0/0-003c/max77696-onkey.0/input/input0
<6>[ 0.206570] MAX77696 ONKEY Driver 1.0.0 Installed
<6>[ 0.226956] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.0 as rtc0
<6>[ 0.246877] max77696-rtc max77696-rtc.0: rtc core: registered max77696-rtc.1 as rtc1
<6>[ 0.266271] MAX77696 RTC Driver 1.0.2 Installed
<6>[ 0.267010] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc2
<6>[ 0.267193] i2c /dev entries driver
<6>[ 0.271361] max77696-battery max77696-battery.0: Voltage alert 3400mV ... 4260mV
<6>[ 0.271787] max77696-battery max77696-battery.0: SOC alert (disabled)
<6>[ 0.272733] MAX77696 Fuel Gauge Driver 1.0.0 Installed
<6>[ 0.274670] MAX77696 USB Interface Circuit Driver 1.0.0 Installed
<6>[ 0.276457] max77696-adc max77696-adc.0: ADC average rate: 32 sample(s)
<6>[ 0.276468] max77696-adc max77696-adc.0: ADC delay: 0 nsec
<6>[ 0.276477] max77696-adc max77696-adc.0: ADC cur src: 50 uA
<6>[ 0.276490] MAX77696 ADC Driver 1.0.1 Installed
<6>[ 0.277089] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
<6>[ 0.277915] sdhci: Secure Digital Host Controller Interface driver
<6>[ 0.277929] sdhci: Copyright(c) Pierre Ossman
<6>[ 0.278042] mmc0: no vmmc regulator found
<7>[ 0.279065] sdhci: =========== REGISTER DUMP (mmc0)===========
<4>[ 0.279074]
<4>[ 0.279077] 0xe0858000: 00000000 00010200 00000000 083a0000
<4>[ 0.279090] 0xe0858010: 00000900 fff6dbff 320f5903 00000b00
<4>[ 0.279101] 0xe0858020: 00000000 ff888088 08800024 008e0118
<4>[ 0.279113] 0xe0858030: 00000000 007f0003 007f0003 00000000
<4>[ 0.279124] 0xe0858040: 07f3b407 08000880 00000011 00000000
<4>[ 0.279135] 0xe0858050: 00000000 00000000 00000000 00000000
<4>[ 0.279145] 0xe0858060: 00000000 00000200 00000000 0800ff00
<4>[ 0.279156] 0xe0858070: 00000000 00000000 00000000 00000000
<4>[ 0.279167] 0xe0858080: 00000000 00000000 00000000 00000000
<4>[ 0.279177] 0xe0858090: 00000000 00000000 00000000 00000000
<4>[ 0.279188] 0xe08580a0: 00000000 00000000 00000000 00000000
<4>[ 0.279198] 0xe08580b0: 00000000 00000000 00000000 00000000
<4>[ 0.279209] 0xe08580c0: 2000780b 00000000 00000006 00212800
<7>[ 0.279223] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
<7>[ 0.279230] CCM: CCOSR(0x000a000c), CCGR6(0x00000030)
<7>[ 0.279237] CCM: CMEOR(0x7fffffff)
<7>[ 0.279243] sdhci: ===========================================
<6>[ 0.280602] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
<6>[ 0.280634] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
<6>[ 0.281933] mmc1: no vmmc regulator found
<7>[ 0.282952] sdhci: =========== REGISTER DUMP (mmc1)===========
<4>[ 0.282961]
<4>[ 0.282963] 0xe0860000: 00000000 00010000 00000000 00000000
<4>[ 0.282975] 0xe0860010: 00000000 00000000 00000000 00000000
<4>[ 0.282986] 0xe0860020: 00000000 ff888088 08800020 0080800f
<4>[ 0.282997] 0xe0860030: 00000000 007f0003 007f0003 00000000
<4>[ 0.283008] 0xe0860040: 07f3b407 08100810 80000000 00000000
<4>[ 0.283019] 0xe0860050: 00000000 00000000 00000000 00000000
<4>[ 0.283030] 0xe0860060: 00000000 00000200 00000000 0800ff00
<4>[ 0.283040] 0xe0860070: 00000000 00000000 00000000 00000000
<4>[ 0.283051] 0xe0860080: 00000000 00000000 00000000 00000000
<4>[ 0.283061] 0xe0860090: 00000000 00000000 00000000 00000000
<4>[ 0.283072] 0xe08600a0: 00000000 00000000 00000000 00000000
<4>[ 0.283082] 0xe08600b0: 00000000 00000000 00000000 00000000
<4>[ 0.283093] 0xe08600c0: 2000780b 00000000 00000006 00212800
<7>[ 0.283106] CCM: CSCMR1(0x00900040), CSCDR1(0x00490b40)
<7>[ 0.283114] CCM: CCOSR(0x000a000c), CCGR6(0x000000f0)
<7>[ 0.283121] CCM: CMEOR(0x7fffffff)
<7>[ 0.283127] sdhci: ===========================================
<6>[ 0.284420] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
<7>[ 0.284994] Registered led device: max77696-leds.0
<6>[ 0.285004] MAX77696 LED Driver #0 1.0.0 Installed
<7>[ 0.285179] Registered led device: max77696-leds.1
<6>[ 0.285188] MAX77696 LED Driver #1 1.0.0 Installed
<6>[ 0.285745] nf_conntrack version 0.5.0 (8032 buckets, 32128 max)
<6>[ 0.286549] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.286616] TCP cubic registered
<6>[ 0.286626] NET: Registered protocol family 17
<6>[ 0.286646] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<3>[ 0.286781] LPDDR2 MfgId: 0x5 [Nanya]
<3>[ 0.290471]
<3>[ 0.290474] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
<3>[ 0.303012]
<3>[ 0.303016] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
<3>[ 0.311879]
<3>[ 0.311883] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
<3>[ 0.320224]
<3>[ 0.320227] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
<3>[ 0.331005] max77696-adc max77696-adc.0: adc conversion timed out
<3>[ 0.343326]
<3>[ 0.343329] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
<3>[ 0.355688]
<3>[ 0.355691] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
<3>[ 0.365327]
<3>[ 0.365330] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
<3>[ 0.375806]
<3>[ 0.375808] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
<3>[ 0.385691]
<3>[ 0.385694] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
<3>[ 0.396381] max77696-adc max77696-adc.0: adc conversion timed out
<6>[ 0.404708] Bus freq driver module loaded
<6>[ 0.404716] Bus freq driver Enabled
<6>[ 0.408929] mxc_dvfs_core_probe
<6>[ 0.409182] DVFS driver module loaded
<6>[ 0.409987]
<6>[ 0.409991] ADC value out of thermistor range! setting display temp to 75 deg C
<4>[ 0.411219] regulator_init_complete: max77696_ldo10: incomplete constraints, leaving on
<4>[ 0.411873] regulator_init_complete: max77696_ldo7: incomplete constraints, leaving on
<4>[ 0.412098] regulator_init_complete: max77696_ldo6: incomplete constraints, leaving on
<4>[ 0.413388] regulator_init_complete: max77696_buck6: incomplete constraints, leaving on
<4>[ 0.413658] regulator_init_complete: max77696_buck5: incomplete constraints, leaving on
<4>[ 0.416174] regulator_init_complete: max77696_buck2dvs: incomplete constraints, leaving on
<4>[ 0.418433] regulator_init_complete: max77696_buck1dvs: incomplete constraints, leaving on
<6>[ 0.436286] max77696-rtc max77696-rtc.0: setting system clock to 2000-01-01 03:39:38 UTC (946697978)
<6>[ 0.445086] KERNEL: I pmic:charger chgina::charger connected
<6>[ 0.451232] MAX77696 Main Charger Driver 1.0.0 Installed
<6>[ 0.454560] MAX77696 Energy Harvester Driver 1.0.0 Installed
<6>[ 0.455152] Freeing init memory: 1240K
<6>[ 0.457032] emmc: I def:mmcpartinfo:vendor=samsung, host=mmc0:
<6>[ 0.491570] mmc0: new high speed DDR MMC card at address 0001
<6>[ 0.491884] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[ 0.492011] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[ 0.492141] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[ 0.492940] mmcblk0: p1 p2 p3 p4
<6>[ 0.495157] mmcblk0boot1: unknown partition table
<6>[ 0.497088] mmcblk0boot0: unknown partition table
<6>[ 0.497274] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
<6>[ 0.575188] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
<4>[ 0.576624] mxc_epdc_eink: module license 'proprietary' taints kernel.
<4>[ 0.576637] Disabling lock debugging due to kernel taint
<4>[ 0.577016] INFO:Loaded module /lib/modules/mxc_epdc_eink.ko (10644 bytes)
<6>[ 0.584216] imx_epdc_fb imx_epdc_fb: Found a video mode override (EE3)
<6>[ 0.645435] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
<6>[ 0.718059] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
<6>[ 1.195636] add wake up source irq 104
<6>[ 1.706830] Retrieved voltage control information
<6>[ 2.265674] KERNEL: I pmic:fg battery id check::wario_battery_valid=0
<6>[ 2.265713] kernel: kernel_metric_high_priority,946697980,counter,kernel,fg,wario battery invalid,1,
<4>[ 3.561158] INFO:Loaded module /lib/modules/mxc_epdc_fb.ko (90660 bytes)
<4>[ 3.755409] INFO:eink initialized... (1575424 bytes)
<4>[ 5.836830] INFO:BATTERY INVALID: -22
<4>[ 6.453730] INFO:
<4>[ 6.453766] ===FL fadedown success===
<4>[ 6.454053] ERROR:
<4>[ 6.454062] === BATTERY ID IS INVALID. STOPPING BOOT ===
<6>[ 6.472393] ARC USBOTG Device Controller driver (1 August 2005)
<6>[ 6.475526] add wake up source irq 75
<4>[ 6.485173] USB Cable is already plugged in. Simulating event
<4>[ 6.490843] INFO:Loaded module /lib/modules/arcotg_udc.ko (34688 bytes)
<6>[ 6.516330] g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
<6>[ 6.516361] g_file_storage gadget: Number of LUNs=1
<7>[ 6.516390] dr_controller_run: udc out low power mode
<6>[ 6.516409] fsl-usb2-udc: bind to driver g_file_storage
<4>[ 6.516553] INFO:Loaded module /lib/modules/g_file_storage.ko removable=1 vendor=0x1949 product=0x0004 release=0x0100 recovery_mode=1 (39244 bytes)
=== END ===↧
Old jailbroken KT - how to reset to factory?
Hi wizards,
I have a very old Kindle Touch that I did some software jailbreak on and Screensaver hack.
I don't remember anymore what I did.
It still works fine but now I'd like to reset to factory and have the latest OS on it.
Is there any simple way that I have missed? Should I use Kubrick?
I don't know how to program, so my technical capabilities are limited.
Or do I have to investigate and find out what exactly I did?
Thanks in advance!
I have a very old Kindle Touch that I did some software jailbreak on and Screensaver hack.
I don't remember anymore what I did.
It still works fine but now I'd like to reset to factory and have the latest OS on it.
Is there any simple way that I have missed? Should I use Kubrick?
I don't know how to program, so my technical capabilities are limited.
Or do I have to investigate and find out what exactly I did?
Thanks in advance!
↧
K5 Having trouble with package signing for custom Kindlet on K5 Touch
Hi, I'm new to Kindle hacking and have been trying to get a Hello World kindlet running on my K5 touch for the last while. Here's some info about my Kindle:
Device: Kindle Touch WiFi
Firmware Version: Kindle 5.1.2 (1679530004)
JBPatch: 4.0.0
I've been roughly following this and this (outdated) and combining that with info from my friend and other things I've come across on this site. I copied Kindlet-2.1.jar off my Kindle, which slightly differs from the first tutorial I linked and significantly differs from the second. I copied the com directory from the root of the jar into my project folder.
Here's my code and directory setup:
developer.keystore: downloaded from here, the latest one (2012-11-06)
kindlet/Main.java:
test.manifest:
build.sh:
In order to build my app, I run my build.sh script, which produces app.azw2. Then, I put it on my Kindle via usb in the documents directory. However, when I try to open the kindlet, I get "This item is not signed by an authorized developer. Please contact the developer." I don't get this error when opening either JBPatch or KUAL, both of which installed fine.
Here's the output of showlog -f while opening the application (after ;debugOn):
Inside that monster of an error log I saw something about an exception being thrown inside untrusted code, so my app code might be wrong (it was kind of patched together and I don't know if I can use swing or what) but there's also a signing issue I think because it's saying the code is untrusted.
Things I've tried:
- Screaming into the void
- Building the JAR using Eclipse (was doing this initially until I made the build script)
- Signing my own developer keys per the second guide I linked above. This was strange because I made new keys and replaced the developer.keystore file on my Kindle at the right location, restarted, and was still unable to launch my app but also was able to launch JBPatch and KUAL. I am not really sure why that is the case but I'm pretty sure I installed it right; I mounted the root directory rw, copied the developer.keystore from my computer into the right location (/var/local/java/keystore/developer.keystore)
- Commenting out the javax.swing import line and the code that draws the textarea + reducing error reporting level. This showlog -f is much more manageable and has some useful information I think:
It looks like this is the crux of the problem:
java.security.NoSuchAlgorithmException: 1.2.840.113549.1.1.11 Signature not available
I don't really know what it wants me to do, though.
It might also be worth noting that I'm running javac 1.8.0_172 (I think the OpenJDK version).
Any advice or pointers in the right direction would be much appreciated! Thanks so much!
Device: Kindle Touch WiFi
Firmware Version: Kindle 5.1.2 (1679530004)
JBPatch: 4.0.0
I've been roughly following this and this (outdated) and combining that with info from my friend and other things I've come across on this site. I copied Kindlet-2.1.jar off my Kindle, which slightly differs from the first tutorial I linked and significantly differs from the second. I copied the com directory from the root of the jar into my project folder.
Here's my code and directory setup:
developer.keystore: downloaded from here, the latest one (2012-11-06)
kindlet/Main.java:
Spoiler:
test.manifest:
Spoiler:
build.sh:
Spoiler:
In order to build my app, I run my build.sh script, which produces app.azw2. Then, I put it on my Kindle via usb in the documents directory. However, when I try to open the kindlet, I get "This item is not signed by an authorized developer. Please contact the developer." I don't get this error when opening either JBPatch or KUAL, both of which installed fine.
Spoiler:
Here's the output of showlog -f while opening the application (after ;debugOn):
Spoiler:
Inside that monster of an error log I saw something about an exception being thrown inside untrusted code, so my app code might be wrong (it was kind of patched together and I don't know if I can use swing or what) but there's also a signing issue I think because it's saying the code is untrusted.
Things I've tried:
- Screaming into the void
- Building the JAR using Eclipse (was doing this initially until I made the build script)
- Signing my own developer keys per the second guide I linked above. This was strange because I made new keys and replaced the developer.keystore file on my Kindle at the right location, restarted, and was still unable to launch my app but also was able to launch JBPatch and KUAL. I am not really sure why that is the case but I'm pretty sure I installed it right; I mounted the root directory rw, copied the developer.keystore from my computer into the right location (/var/local/java/keystore/developer.keystore)
- Commenting out the javax.swing import line and the code that draws the textarea + reducing error reporting level. This showlog -f is much more manageable and has some useful information I think:
Spoiler:
It looks like this is the crux of the problem:
java.security.NoSuchAlgorithmException: 1.2.840.113549.1.1.11 Signature not available
I don't really know what it wants me to do, though.
It might also be worth noting that I'm running javac 1.8.0_172 (I think the OpenJDK version).
Any advice or pointers in the right direction would be much appreciated! Thanks so much!
↧
↧
Removing "old" KUAL, any news
Hi all,
I apologize - expecially to Knc1 - but I can't find the thread any more, despite I had set a subscription on it...
A few months ago, with a firmware update, the booklet version of KUAL became invalid.
No problem as the "other" version was (and is) still perfectly working, it was just a matter of installing it.
The only problem was that, for some reason I can't remember but you surely know, it was not possible to remove the old KUAL from the book list on PW3 menu, for some reason it lasted on Kindle's internal db and wouldn't go away.
I remember that Knc1 was working on a fix for this and he should have warned us when/if he was able to work it out.
I would like to know if a solution has eventually been found and a link to that, if possible. I tried but there are so many threads about KUAL that I can't identify the right one.
Thanks!
I apologize - expecially to Knc1 - but I can't find the thread any more, despite I had set a subscription on it...
A few months ago, with a firmware update, the booklet version of KUAL became invalid.
No problem as the "other" version was (and is) still perfectly working, it was just a matter of installing it.
The only problem was that, for some reason I can't remember but you surely know, it was not possible to remove the old KUAL from the book list on PW3 menu, for some reason it lasted on Kindle's internal db and wouldn't go away.
I remember that Knc1 was working on a fix for this and he should have warned us when/if he was able to work it out.
I would like to know if a solution has eventually been found and a link to that, if possible. I tried but there are so many threads about KUAL that I can't identify the right one.
Thanks!
↧
PW3 Updating PW3 firmware to 5.9.5.1 - correct procedure?
I would like to update the firmware on my jailbroken PW3 from 5.9.4 (3278740046) to 5.9.5.1. Every time I have updated the firmware previously, I have had a right old time trying to get the screensavers hack working again. Should the procedure simply be as follows:
- install fw update
- install mrpi
- run the command ';log mrpi' in the search bar
- copy over Update_KUALBooklet_v*_install.bin to get KUAL back
- reinstall Python & the screensavers package by downloading the latest snapshots and copying than to the Packages folder
Thanks
- install fw update
- install mrpi
- run the command ';log mrpi' in the search bar
- copy over Update_KUALBooklet_v*_install.bin to get KUAL back
- reinstall Python & the screensavers package by downloading the latest snapshots and copying than to the Packages folder
Thanks
↧
KV Recovering KUAL after 5.9.5.1 upgrade? ";log mrpi" has no effect
Sorry about having to create a new thread but I've not found anything that appears to match what I'm seeing...
TL;DR - Tried to switch to KUAL Booklet after update but neither ";log mrpi" nor ";un" work - ";711" does. Moving /usbnet/DISABLED_auto -> /usbnet/auto made no difference...
I've a KV (B013 09 - UK Wifi) which is now running f/w 5.9.5.1. I added the jailbreak some time ago, and it's been through a few firmware updates, which just means redoing the packages. It last updated some time ago, but I only really use the jailbreak/KUAL to update the categories and I'd not added any books via for a while, so only recently tried to run KUAL. I got "Application Error: The selected application could not be started", so headed here.
My searches suggested re-installing the mrinstaller, which I've done by unpacking the kual-mrinstaller-1.7.N-r14996 archive to the Kindle via the usb mount on my Mac, then added the Update KUALBooklet binary to mrpackages, then tried to trigger things via ";log mrpi" but the latter has no effect.
I've also in the past had usb-networking working, but can't trigger it now, so I'm wondering if I'm missing something, has the update removed whatever the ";log mrpi" should be doing or maybe my original jailbreak was an old one and the ";log mrpi" functionality was added subsequently (just guessing).
Anyway, any thoughts/pointers or suggestions for things to try? It would be nice to have the option to manage Collections, but it's not worth my trying to downgrade the firmware nor taking the device apart to try to add a serial line!
TL;DR - Tried to switch to KUAL Booklet after update but neither ";log mrpi" nor ";un" work - ";711" does. Moving /usbnet/DISABLED_auto -> /usbnet/auto made no difference...
I've a KV (B013 09 - UK Wifi) which is now running f/w 5.9.5.1. I added the jailbreak some time ago, and it's been through a few firmware updates, which just means redoing the packages. It last updated some time ago, but I only really use the jailbreak/KUAL to update the categories and I'd not added any books via for a while, so only recently tried to run KUAL. I got "Application Error: The selected application could not be started", so headed here.
My searches suggested re-installing the mrinstaller, which I've done by unpacking the kual-mrinstaller-1.7.N-r14996 archive to the Kindle via the usb mount on my Mac, then added the Update KUALBooklet binary to mrpackages, then tried to trigger things via ";log mrpi" but the latter has no effect.
Code:
imac:Kindle gwyn$ pwd
/Volumes/Kindle
imac:Kindle gwyn$ ls -l
total 43920
...
drwxrwxrwx 1 gwyn staff 8192 2 Feb 08:36 mkk
drwxrwxrwx@ 1 gwyn staff 8192 1 Jun 23:38 mrpackages
drwxrwxrwx 1 gwyn staff 8192 6 Mar 16:43 python
drwxrwxrwx 1 gwyn staff 8192 9 Jul 2016 rp
drwxrwxrwx 1 gwyn staff 8192 27 May 19:02 system
drwxrwxrwx 1 gwyn staff 8192 2 Jun 15:28 usbnet
imac:Kindle gwyn$ ls -l mrpackages/
total 112
-rwxrwxrwx@ 1 gwyn staff 48648 1 Jun 16:52 Update_KUALBooklet_v2.7.11_install.bin
-rwxrwxrwx@ 1 gwyn staff 4887 1 Aug 2016 Update_dummy_0.0.N.binAnyway, any thoughts/pointers or suggestions for things to try? It would be nice to have the option to manage Collections, but it's not worth my trying to downgrade the firmware nor taking the device apart to try to add a serial line!
↧
PW3 Unbrick a Kindle PW3 7th Generation
Hi guys,
This is my first post, and it's because one day after charging my discharged Kindle PW3 7th generation it started with an infinity loop reboot like this video:
https://www.youtube.com/watch?v=tPz7NNSPYi8
Well, I start searching in Internet about the problem and after trying Amazon Support without result, I found the next video with steps for flashing the device:
https://www.youtube.com/watch?v=xBquDhGZXoU
After a lot of work, I got access to the debug mode from the device, but I did the same mistake as MADMAXXX from this old post (https://www.mobileread.com/forums/sh...d.php?t=269099) choosing the "Erase All" command in the recovery menu :smack: .
The situation is the next, I'm capable to access to the fastboot mode (uboot > bist fastboot) and transfer the files uImage and the rootfs.img (obtained from the last update file from Amazon with kindletool) to the device, but it doesn's work, the device can't load the recovery menu because I think the diags images doesn't exist.
The question is, exist a solution for the problem or my best option is buy a new device?
Regards.
PD: Sorry about my bad English.
This is my first post, and it's because one day after charging my discharged Kindle PW3 7th generation it started with an infinity loop reboot like this video:
https://www.youtube.com/watch?v=tPz7NNSPYi8
Well, I start searching in Internet about the problem and after trying Amazon Support without result, I found the next video with steps for flashing the device:
https://www.youtube.com/watch?v=xBquDhGZXoU
After a lot of work, I got access to the debug mode from the device, but I did the same mistake as MADMAXXX from this old post (https://www.mobileread.com/forums/sh...d.php?t=269099) choosing the "Erase All" command in the recovery menu :smack: .
The situation is the next, I'm capable to access to the fastboot mode (uboot > bist fastboot) and transfer the files uImage and the rootfs.img (obtained from the last update file from Amazon with kindletool) to the device, but it doesn's work, the device can't load the recovery menu because I think the diags images doesn't exist.
The question is, exist a solution for the problem or my best option is buy a new device?
Regards.
PD: Sorry about my bad English.
↧
↧
Kindlet Error launching Kindlet: "This item is not signed by an authorized developer."
Hello,
When I try to run an custom Kindlet I get the following message "This item is not signed by an authorized developer. Please Contact the developer"
I have follow the step in https://www.mobileread.com/forums/sh...d.php?t=219663
for creating the manifest and signing the jar.
I'm using the commands line to build/sign the jar
the keystore file is the newest from https://www.mobileread.com/forums/sh...d.php?t=152294 and I have the same on my K4.
Does someone has ever encounter this error ?
Thanks
When I try to run an custom Kindlet I get the following message "This item is not signed by an authorized developer. Please Contact the developer"
I have follow the step in https://www.mobileread.com/forums/sh...d.php?t=219663
for creating the manifest and signing the jar.
I'm using the commands line to build/sign the jar
Code:
javac com\nowhere\sample\*.java -cp log4j-1.2.15.jar;Kindlet-1.3.jar
jar cvmf test.manifest Test.jar com
jarsigner -keystore developer.keystore -storepass password Test.jar dktest
jarsigner -keystore developer.keystore -storepass password Test.jar ditest
jarsigner -keystore developer.keystore -storepass password Test.jar dntest
move Test.jar Test.azw2Does someone has ever encounter this error ?
Thanks
↧
KOReader on KOA2: Possible yet?
My apologies if this should be in the KOReader forum!
I have installed KOReader on my KOA2. It seems to be correctly installed, but when I tap "KUAL", then "KOReader", then "Start the filemanager", the display blinks but that's it.
How did I install everything?
Following these instructions, I installed the MR package installer on my KOA2. Then, I added coplate's patched version of the Update_KUALBooklet_v*_install.bin file to the mrpackages folder.
I ran ;log mrpi and everything seemed to install as expected.
I downloaded the latest KOReader nightly. (I also tried the newest stable version, with the same results.) I see KOReader as a menu item in KUAL, so I assume it is installed correctly.
I tap "start the filemanager", as I said previously, and just get one blink on the display.
Did I miss any crucial steps? Will KOReader even run yet on the KOA2? If anyone has succeeded in this, I'd appreciate your help.
I have installed KOReader on my KOA2. It seems to be correctly installed, but when I tap "KUAL", then "KOReader", then "Start the filemanager", the display blinks but that's it.
How did I install everything?
Following these instructions, I installed the MR package installer on my KOA2. Then, I added coplate's patched version of the Update_KUALBooklet_v*_install.bin file to the mrpackages folder.
I ran ;log mrpi and everything seemed to install as expected.
I downloaded the latest KOReader nightly. (I also tried the newest stable version, with the same results.) I see KOReader as a menu item in KUAL, so I assume it is installed correctly.
I tap "start the filemanager", as I said previously, and just get one blink on the display.
Did I miss any crucial steps? Will KOReader even run yet on the KOA2? If anyone has succeeded in this, I'd appreciate your help.
↧
PW2 PW2 Hangs During Boot
Stopped booting, so I soldered up a serial connection.
[ 14.918988] mmc0: Timeout, intmask=0x00100002
[ 14.925862] mmcblk0: error -110 transferring data, sector 945154, nr 2, cmd response 0x900, card status 0xd00
[ 14.937370] end_request: I/O error, dev mmcblk0, sector 945154
[ 14.943231] Buffer I/O error on device mmcblk0p3, logical block 15873
[ 20.377726] mmc0: Timeout, intmask=0x00100002
On the second boot in the log I entered the recovery menu to see what options are available. What should my next steps be?
[ 14.918988] mmc0: Timeout, intmask=0x00100002
[ 14.925862] mmcblk0: error -110 transferring data, sector 945154, nr 2, cmd response 0x900, card status 0xd00
[ 14.937370] end_request: I/O error, dev mmcblk0, sector 945154
[ 14.943231] Buffer I/O error on device mmcblk0p3, logical block 15873
[ 20.377726] mmc0: Timeout, intmask=0x00100002
On the second boot in the log I entered the recovery menu to see what options are available. What should my next steps be?
Code:
U-Boot 2009.08-lab126 (Jul 02 2017 - 01:45:38)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 37 C, calibration data 0x5855065f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201145030Q2Q
S/N: 90172201451505XB
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 4089 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2920540 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.097489] boot: C def:bcut:batterycut=1
[ 0.274649] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.278512]
[ 0.278514] just text: vaddr c0129f3c, va 0xc0129200 pa 0x801000c3 attr 0x6
[ 0.291160]
[ 0.291163] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.300004]
[ 0.300007] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.308404]
[ 0.308406] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.319179]
[ 0.319181] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.333529]
[ 0.333531] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.345662]
[ 0.345664] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.356015]
[ 0.356018] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.365904]
[ 0.365906] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
DEBUG:recovery-util.c:1570:setup_die_signals():Installed signal handlers.
3.0.35-lab126 #2 PREEMPT Sun Jul 2 01:50:33 PDT 2017 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6688752
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:sy00::
info system:mounted_dev::
info milestone:6.80:49.1:
info milestone:6.83:49.2:
info milestone:6.86:49.3:
info milestone:6.91:49.4:
info milestone:6.95:49.5:
info sytem:mounted_tmpfs::
info milestone:7.03:sy50:
info system:start:time=7060:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.27:sy51:
lipc-send-event[843]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[844]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[843]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[844]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[843]: C def:dbusi::Failed to init dbus
lipc-send-event[844]: C def:dbusi::Failed to init dbus
lipc-send-event[843]: E def:open::Failed to open LIPC
lipc-send-event[844]: E def:open::Failed to open LIPC
lipc-send-event[843]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[844]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.29:sy99:
info system:done:time=8320:
crond[886]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (884) terminated with status 2
init.exe: sshd mai process endedini?.exe: recevent pre-start procinfo system_fs_loopbacks:mountingfs:Mounting compressed directories filesystem images:
warn system_fs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.sqsh not mounted, non existing mounting point:
info system_fs_loopbacks:mounted:Image /usr/share/X11/xkb.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/java/lib/fonts.sqsh mounted:
info system_fs_loopbacks:mounted:Image /etc/kdb.src.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/lib/locale.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/share/keyboard.sqsh mounted:
info system_fs_loopbacks:mounted:Image /opt/var/local.sqsh mounted:
info system:emiting_event:mounted_fs_loopbacks:
debug sytem:event_emitted:mounted_fs_loopbacks:
info milestone:9.04:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module fsl_otg_arc:
info system:emiting_event:loaded_fsl_otg_arc:
debug sytem:event_emitted:loaded_fsl_otg_arc:
info modules:modprobe:loading module ehci_hcd:
info system:emiting_event:loaded_ehci_hcd:
debug sytem:event_emitted:loaded_ehci_hcd:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info milestone:9.36:fs00:
info system:emiting_event:loaded_ppp_async:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
[ 14.918988] mmc0: Timeout, intmask=0x00100002
[ 14.925862] mmcblk0: error -110 transferring data, sector 945154, nr 2, cmd response 0x900, card status 0xd00
[ 14.937370] end_request: I/O error, dev mmcblk0, sector 945154
[ 14.943231] Buffer I/O error on device mmcblk0p3, logical block 15873
[ 20.377726] mmc0: Timeout, intmask=0x00100002
[ 66.515794] bcut: C def:pcut:wario pending 15 second battery cut:
?HW
U-Boot 2009.08-lab126 (Jul 02 2017 - 01:45:38)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 39 C, calibration data 0x5855065f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201145030Q2Q
S/N: 90172201451505XB
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 4122 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2920540 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.097500] boot: C def:bcut:batterycut=1
[ 0.274524] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.278699]
[ 0.278703] just text: vaddr c0129f3c, va 0xc0129200 pa 0x801000c3 attr 0x6
[ 0.291133]
[ 0.291136] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[ 0.299974]
[ 0.299977] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[ 0.308307]
[ 0.308309] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.319079]
[ 0.319082] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.333496]
[ 0.333498] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.345582]
[ 0.345584] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.355953]
[ 0.355955] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.365903]
[ 0.365905] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
DEBUG:recovery-util.c:1570:setup_die_signals():Installed signal handlers.
3.0.35-lab126 #2 PREEMPT Sun Jul 2 01:50:33 PDT 2017 armv7l
Press [ENTER] for recovery menu... 0 /
Charge: 100% [##########################################################]
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /
Charge: 100% [##########################################################]
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 1 -
Menu timeout
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:sy00::
info system:mounted_dev::
info milestone:17.40:49.1:
info milestone:17.43:49.2:
info milestone:17.46:49.3:
info milestone:17.51:49.4:
info milestone:17.55:49.5:
info sytem:mounted_tmpfs::
info milestone:17.63:sy50:
info system:start:time=17660:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:17.87:sy51:
lipc-send-event[840]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[839]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[839]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[839]: C def:dbusi::Failed to init dbus
lipc-send-event[839]: E def:open::Failed to open LIPC
lipc-send-event[839]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[840]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[840]: C def:dbusi::Failed to init dbus
lipc-send-event[840]: E def:open::Failed to open LIPC
lipc-send-event[840]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:18.78:sy99:
info system:done:time=18810:
crond[856]: crond: crond (busybox 1.17.1) started, log level 8
ini?.exe: sshd main process (854)init.exe: sshd main process ended, resp?wning
init.exe: recevent pre-start process (859) terminated with status 1
info system_fs_loopbacks:mountingfs:Mounting compressed directories filesystem images:
warn system_fs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.sqsh not mounted, non existing mounting point:
info system_fs_loopbacks:mounted:Image /usr/share/X11/xkb.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/java/lib/fonts.sqsh mounted:
info system_fs_loopbacks:mounted:Image /etc/kdb.src.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/lib/locale.sqsh mounted:
info system_fs_loopbacks:mounted:Image /usr/share/keyboard.sqsh mounted:
info system_fs_loopbacks:mounted:Image /opt/var/local.sqsh mounted:
info system:emiting_event:mounted_fs_loopbacks:
debug sytem:event_emitted:mounted_fs_loopbacks:
info milestone:19.50:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module fsl_otg_arc:
info system:emiting_event:loaded_fsl_otg_arc:
debug sytem:event_emitted:loaded_fsl_otg_arc:
info modules:modprobe:loading module ehci_hcd:
info system:emiting_event:loaded_ehci_hcd:
debug sytem:event_emitted:loaded_ehci_hcd:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:19.66:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
[ 25.215074] mmc0: Timeout, intmask=0x00100002
[ 25.221613] mmcblk0: error -110 transferring data, sector 945154, nr 2, cmd response 0x900, card status 0xd00
[ 25.233408] end_request: I/O error, dev mmcblk0, sector 945154
[ 25.239271] Buffer I/O error on device mmcblk0p3, logical block 15873
[ 30.677718] mmc0: Timeout, intmask=0x00100002
[ 240.164570] INFO: task mount:1004 blocked for more than 120 seconds.
[ 240.170928] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.181581] waiters_print:98
[ 360.184578] INFO: task mount:1004 blocked for more than 120 seconds.
[ 360.190936] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.201567] waiters_print:98
[ 480.204577] INFO: task mount:1004 blocked for more than 120 seconds.
[ 480.210935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.221580] waiters_print:98
[ 600.224578] INFO: task mount:1004 blocked for more than 120 seconds.
[ 600.230936] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 600.241573] waiters_print:98
[ 720.244578] INFO: task mount:1004 blocked for more than 120 seconds.
[ 720.250937] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 720.261630] waiters_print:98
[ 840.264577] INFO: task mount:1004 blocked for more than 120 seconds.
[ 840.270935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 840.281538] waiters_print:98
[ 960.284570] INFO: task mount:1004 blocked for more than 120 seconds.
[ 960.290928] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 960.301595] waiters_print:98
[ 1080.304573] INFO: task mount:1004 blocked for more than 120 seconds.
[ 1080.310930] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1080.321536] waiters_print:98
[ 1080.332063] INFO: task sh:1013 blocked for more than 120 seconds.
[ 1080.339753] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1080.349739] waiters_print:98
[ 1200.344570] INFO: task mount:1004 blocked for more than 120 seconds.
[ 1200.350928] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1200.361572] waiters_print:98↧
Does firmware update 5.9.6 survive jailbreak?
I'm not brave enough to try.
↧
↧
PW3 Serial debrick stuck on tree
Hi forum members,
while I was in the US, my jailbroken german PW3 tried to make an OTA update. After the update it got stuck at the "boy under the tree" screen. I had this problem before and could recover the device by connecting to the serial port, launching the recovery menu and basically following this post. So i tried to do the same again, but simply nothing happens when I select "u" in the recovery menu (all the other steps work). I'd be very thankful if anyone could take the time to give me a hint on how to solve the problem!
I used this image: https://s3.amazonaws.com/firmwaredow...te_5.9.5.1.bin
while I was in the US, my jailbroken german PW3 tried to make an OTA update. After the update it got stuck at the "boy under the tree" screen. I had this problem before and could recover the device by connecting to the serial port, launching the recovery menu and basically following this post. So i tried to do the same again, but simply nothing happens when I select "u" in the recovery menu (all the other steps work). I'd be very thankful if anyone could take the time to give me a hint on how to solve the problem!
I used this image: https://s3.amazonaws.com/firmwaredow...te_5.9.5.1.bin
↧
Tutorial Pinyin implementation
I just noticed that when enabled in the language learning options:
Attachment 164394
Books in chinese language (such as the Kindle User's Guide Chinese Edition in these screenshots) will (unsurprisingly) display pinyin above chinese characters:
Attachment 164393
And have an active pinyin level menu:
Attachment 164392
The feature doesn't seem to be implemented in a way similar to wordwise. I couldn't find an equivalent of the mnt_us/system/kll/kll.en.en.klld wordwise data base with accompanying mnt_us/bookASIN.sdr/LanguageLayer.en.ASIN.kll in the sdr directory for the book.
By curiosity, has anybody researched how/where pinyin is implemented?
Attachment 164394
Books in chinese language (such as the Kindle User's Guide Chinese Edition in these screenshots) will (unsurprisingly) display pinyin above chinese characters:
Attachment 164393
And have an active pinyin level menu:
Attachment 164392
The feature doesn't seem to be implemented in a way similar to wordwise. I couldn't find an equivalent of the mnt_us/system/kll/kll.en.en.klld wordwise data base with accompanying mnt_us/bookASIN.sdr/LanguageLayer.en.ASIN.kll in the sdr directory for the book.
By curiosity, has anybody researched how/where pinyin is implemented?
↧
PW3 broken eMMC?
Kindle does not boot.
Serial console output:
Serial console output:
Code:
U-Boot 2009.08-lab126 (Apr 23 2014 - 01:01:24)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 38 C, calibration data 0x5935205f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Card did not respond to voltage select!
### ERROR ### Please RESET the board ###↧