DX(G) downgrade to 2.5.8

January 16, 2021, 2:37 pm

Hi

I received a Kindle DXG which is running on FW3.3
It wont connect to 3G and thus neither to amazon, I suppose due to the altered FW...
thats why I was thinking about going back to the official 2.5.8. Is there a easy way to do that?

↧

KV How to diagnose brick?

January 16, 2021, 5:47 pm

≫ Next: PW2 How to make Chinese fonts work for jbed 5.4.2.1?

≪ Previous: DX(G) downgrade to 2.5.8

I got my hands on a "broken" KV that does not boot but only displays a battery with an "!".

Connected to a PC it shows up as "SE Blank MEGREZ" and no drive. I want to fix it.
To find out what is broken I want to boot into diagnostic mode.
I tried MfgTool from KindleSelectBoot.zip but it does not detect the KV. According to some post here the MfgTool in KindleSelectBoot is too old for the KV. So I searched for a newer version but only found uuu.
uuu detects the KV:

Code:

Connected Known USB Devices

        Path     Chip    Pro     Vid     Pid     BcdVersion

        ==================================================

        1:3      MX6SL   SDP:    0x15A2 0x0063   0x0001

How can I boot into diagnostics mode without MfgTool? And does the diagnostics mode help to figure out why the KV does not work? Any suggestion for what I could try?
My goal is a working KV, jailbreaking is not my goal.

I have orderd a USB->TTL stick but it will not arrive for another month.

Thank you for your help :)

↧

PW2 How to make Chinese fonts work for jbed 5.4.2.1?

January 18, 2021, 7:25 am

≫ Next: PW2 Screensaver not in full size

≪ Previous: KV How to diagnose brick?

Greetings everyone. I am living in China so I read a lot of novels and books in Chinese on my KPW2. It has accompanied me for over 5 years so far.
Yet for all the books I read in Chinese, only two fonts are available, even after I applied the Font's hack.
I've gone through all posts/snapshots in the developer's corner, yet failed to find any solutions for this.
Could anybody here plz tell me how to add my customized fonts in CHINESE for KPW2?
Environement: KPW2, 6th gen, FW5.4.2.1, jbed.
USBNetwork is working fine with me.

Thanks in advance.

↧

PW2 Screensaver not in full size

January 18, 2021, 1:06 am

≫ Next: Why i cannot connect to my PW4 over Wi-Fi with USBNetwork

≪ Previous: PW2 How to make Chinese fonts work for jbed 5.4.2.1?

Hi guys, I've come here to seek advice on an awkward issue with ss: customized ss would not be shown in full size on my Kindle Paperwhite 2 (6th gen) device. Troubleshooting link here and also the picture uploaded for your reference.
Background description:
1) My Kindle FW version is 5.4.2.1 and jailbroken.
2) Installed NuJeLu's SS hack pack through KUAL. All customized screensavers were tailored to 600*800 pixel in size and kept in the Screensaver folder under SS hack package.
I'd be much appreciated if anyone here could give me a clue or two.

Attached Thumbnails

Click image for larger version

Name: Kindle SS Improper size.jpg
Views: N/A
Size: 160.1 KB
ID: 184808

↧

Why i cannot connect to my PW4 over Wi-Fi with USBNetwork

January 19, 2021, 9:45 am

≫ Next: PW2 What is the newest firmware a PW2 can have to be Jailbroken?

≪ Previous: PW2 Screensaver not in full size

Hello and sorry if this question whas already asked, and sorry for my english too.

Ive install into my PW4 the USBNetwork plugin. Toogle it, but i cannot find the Kindle in my android file system. Im using Solid Explorer to connect to my PC with SMB, but i cannot find when im looking for New deveice the Kindle...

I Just want to send to my Kindle some new images for the screensaver, font and maybe few epub file without always plug into my computer.

Ive not found any instruction to proceed to be able to link my android phone with my Kindle over Wi-Fi.

thanks again for your precious help.

↧

PW2 What is the newest firmware a PW2 can have to be Jailbroken?

January 20, 2021, 10:55 pm

≫ Next: KindleDrip From Your Kindles Email Address to Using Your Credit Card

≪ Previous: Why i cannot connect to my PW4 over Wi-Fi with USBNetwork

What brought me to this forum is a dream. A dream of merging my two favorite things into one: reading and chess.

Well in all fairness they are not my favorite nor I've ever dreamed about this things specifically, but I do them a lot. Also, right after this damn pandemic is over I'll be making a long trip where I hope to do a lot of reading and maybe become a 1600 player and a Jailbroken kindle sounds like a great companion for such trip.

Recently I discovered pbchess and I was floored by the possibilities. And here I am, sorting through all these threads trying to figure out how to jailbreak my kindle which turns out is "unjailbreakeable" (KT4)

I saw on the Where Do I Start? sticky thread that I could Jailbreak a PW2 with 5.4.3.2

Quote:

PW2: 5.4.3.2 (MD5: 3cbac0b4821cec03432b9ed382744f41)

My question is, can I buy a PW2 with a newer FW?

Im new in this whole jailbreaking so please ELI5

Thanks a bunch!

↧

KindleDrip From Your Kindles Email Address to Using Your Credit Card

January 21, 2021, 3:09 am

≫ Next: please, help me to configure pw3 as 2nd monitor

≪ Previous: PW2 What is the newest firmware a PW2 can have to be Jailbroken?

A kindle RCE was published:
https://medium.com/realmodelabs/kindledrip-from-your-kindles-email-address-to-using-your-credit-card-bb93dbfb2a08

The issue was fixed in firmware 5.13.4.

↧

please, help me to configure pw3 as 2nd monitor

January 24, 2021, 10:58 am

≫ Next: PW3 Any possibility to Upgrade Kindle PW3 7th gen storage

≪ Previous: KindleDrip From Your Kindles Email Address to Using Your Credit Card

hello :) a few days ago, i saw on the internet that is possible to use a kindle as a 2nd monitor, so i thought to give it a go

i don't have much experience with such related stuff, but i got a kindle pw3, and after reading info's on internet, i ended up on this thread; so far, i managed to :
... discover that my kindle is actually pw3, serial g090g1*
... install :
...... on kindle :
......... firmware 5.7.4
......... kindle-jb-factory-1.2-r15011.tar.xz
......... JailBreak-1.16.N-FW-5.x-hotfix.zip
......... kindle-usbnet-0.22.N-r18011.tar.xz
......... kindlevncviewer.zip
...... on win 7 pc :
......... tightvnc-2.8.59-gpl-setup-32bit.msi
......... putty-0.74-installer.msi
......... turn off windows firewall

";usbnetwork" on kindle, plug it in, then putty, then it blocks, as shown in image 4

please, is there a way to make things work ? kindly :)

ps : it took me a while to get so far, i mixed infos from different places, and most of the files i found here, on this thread; thanks to those that shared those, and i guess that is a bit involving, as seing that some files are updated several years in a row :) it seems there are some dedicated persons

Attached Thumbnails

Click image for larger version

Name: 01.png
Views: N/A
Size: 24.1 KB
ID: 184912

Click image for larger version

Name: 02.png
Views: N/A
Size: 50.9 KB
ID: 184913

Click image for larger version

Name: 03.png
Views: N/A
Size: 56.1 KB
ID: 184914

Click image for larger version

Name: 04.png
Views: N/A
Size: 61.0 KB
ID: 184915

↧

PW3 Any possibility to Upgrade Kindle PW3 7th gen storage

January 25, 2021, 7:20 am

≫ Next: K3 how to check the serial number when there is no menu?

≪ Previous: please, help me to configure pw3 as 2nd monitor

Hi All,

You guys have the best documents/threads on all kind of Kindle stuff...
I have discovered it recently, even tough I have used kindle for past 4 years.

Can any of you please confirm if there is any woking solution to upgrade the kindle PW3 7th gen to 32 GB storage space or more ?

I have seen documentation on PW2, so was thinking .. its is possible ? :help:

↧

K3 how to check the serial number when there is no menu?

January 26, 2021, 12:47 pm

≫ Next: K3 Menu disabled???

≪ Previous: PW3 Any possibility to Upgrade Kindle PW3 7th gen storage

Hello,
I like fixing broken devices.
Recently came across a broken Kindle Keyboard (D00901).

After replacing the battery, few restarts and a factory reset, the device boots.
IT does not read any of the books it has in the memory (I've added new ones via calibre after the factory reset).
When I press the @Menu@ button, nothing happens.

All other buttons work just fine.
I noticed that the entire "system" directory is missing.
This makes me wonder if the device is not a victim of a failed hack?

I can get the device to the recovery menu.
So I guess I could use that to update the firmware.

BUT - without the Menu, I cannot go to the settings and read the serial number.
Is there a way to read the SN (and ideally - the software version) in another way? I don't even know if it is the 3G or just Wifi :/

Thanks!

↧

K3 Menu disabled???

January 26, 2021, 2:42 pm

≫ Next: KT3 Android on Kindle X Migu (KT3)?

≪ Previous: K3 how to check the serial number when there is no menu?

Hello,
I bought a broken Kindle Keyboard Wifi. Managed to bring it back to life, did a factory reset.
Everything works, did the system diags, tested all the keyboard, conencted to wifi etc.

The only two things that are unusual are:
1) when I press Menu button, nothing happens. I cannot access the menu.
2) when I add books via calibre, they do not show on in the reader.

Have you seen this before? Is that something that can be undone in the debug options?

Thank you for reading!

↧

KT3 Android on Kindle X Migu (KT3)?

January 27, 2021, 8:23 am

≫ Next: Kindle PW randomly restarts when using KOReader

≪ Previous: K3 Menu disabled???

Hi everyone! I have a change to own an Kindle X Migu (a version of KT3 in China market) and it seem running a version of Android.
Below is what I got via UART cmdline. Can anyone have a look and have an idea? What could I try to do? Sideload Playstore or something crazy? :D

Code:

U-Boot 2014.04-g4149b2b (Nov 21 2017 - 19:04:04), Build: jenkins-fireos-main-dev-patch-build-46292



CPU:   Freescale i.MX6SL rev1.3 at 792 MHz

CPU:   Temperature 36 C, calibration data: 0x5905125f

Reset cause: unknown reset

FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2

Board: Heisenberg

Board Id: P0011807746309KS

S/N: G000...

I2C:   ready

DRAM:  512 MiB

MMC:   FRED::: EXTCSD177=0, 179=48FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2

*** Warning - bad CRC, using default environment



In:    serial

Out:   serial

Err:   serial

REBOOTMODE: 13

using default bootcmdflash target is MMC:1

Battery voltage:  4201 mV

Normal Boot

Hit any key to stop autoboot:  0

mmc1(part 0) is current device

FRED::: EXTCSD177=0, 179=48BOOTing from mmc ...

booti mmc1

Certificate authenticated

==============

Image Metadata

==============

product:eanab

signer:CodeSigner

Image AUTHENTICATED with PRODUCTION certificate

kernel   @ 82808000 (4819728)

ramdisk  @ 83800000 (763504)

fdt      @ 83700000 (34650)

Verify Signed Unlock Code Failed!

kernel cmdline:

        use boot.img command line:

        console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale androidboot.selinux=enforcing uart_at_4M androidboot.serialno=G000MR0374650PTG androidboot.unlocked_kernel=false androidboot.prod=1

   Using Device Tree in place at 83700000, end 8370b759



Starting kernel ...



Uncompressing Linux... done, booting the kernel.

Spoiler: 



[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.10.53-lab126 (build@i3-ri-14-use1a-b-51) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Wed Sep 30 20:18:04 UTC 2020

[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine: Freescale i.MX6 SoloLite (Device Tree), model: Heisenberg P0

[    0.000000] cma: CMA: reserved 32 MiB at 9e000000

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] CPU: All CPU(s) started in SVC mode.

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792

[    0.000000] Kernel command line: console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale androidboot.selinux=enforcing uart_at_4M androidboot.serialno=G000MR0374650PTG androidboot.unlocked_kernel=false androidboot.prod=1

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Memory: 447MB 64MB = 511MB total

[    0.000000] Memory: 476152k/476152k available, 48136k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .text : 0xc0008000 - 0xc07d89f0   (8003 kB)

[    0.000000]       .init : 0xc07d9000 - 0xc081f4e4   ( 282 kB)

[    0.000000]       .data : 0xc0820000 - 0xc08701e0   ( 321 kB)

[    0.000000]        .bss : 0xc08701e0 - 0xc08af590   ( 253 kB)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] NR_IRQS:16 nr_irqs:16 16

[    0.000000] L310 cache controller enabled

[    0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 262144 B

[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

[    0.000000] Console: colour dummy device 80x30

[    0.000378] Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544)

[    0.040122] pid_max: default: 32768 minimum: 301

[    0.040218] Security Framework initialized

[    0.040231] SELinux:  Initializing.

[    0.040314] Mount-cache hash table entries: 512

[    0.044148] CPU: Testing write buffer coherency: ok

[    0.044399] Setting up static identity map for 0xc05f1bc0 - 0xc05f1c18

[    0.045194] devtmpfs: initialized

[    0.047010] pinctrl core: initialized pinctrl subsystem

[    0.047249] regulator-dummy: no parameters

[    0.049159] NET: Registered protocol family 16

[    0.056324] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.057025] LAB126 Board id - P0011807746309KS

[    0.057097] Use WDOG1 as reset source

[    0.061602] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered

[    0.061814] vdd1p1: 800 <--> 1375 mV at 1100 mV

[    0.062060] vdd3p0: 2625 <--> 3400 mV at 3000 mV

[    0.062315] vdd2p5: 2100 <--> 2850 mV at 2500 mV

[    0.062536] cpu: 725 <--> 1450 mV at 1100 mV

[    0.062772] vddpu: 725 <--> 1450 mV

[    0.063018] vddsoc: 725 <--> 1450 mV at 1175 mV

[    0.064597] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered

[    0.066282] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered

[    0.067830] amp_boost_enable:iMX:MAX98090:BOARD

[    0.067857] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

[    0.067864] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.070687] imx6sl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver

[    0.076296] bio: create slab <bio-0> at 0

[    0.077346] SCSI subsystem initialized

[    0.077551] usbcore: registered new interface driver usbfs

[    0.077600] usbcore: registered new interface driver hub

[    0.077720] usbcore: registered new device driver usb

[    0.078953] bd7181x 0-004b: IRQ 276 GPIO 116

[    0.084143] buck1: 800 <--> 2000 mV at 1300 mV

[    0.085153] buck2: 800 <--> 2000 mV at 1300 mV

[    0.085954] buck3: 1200 <--> 2700 mV at 1800 mV

[    0.086716] buck4: 1100 <--> 1850 mV at 1200 mV

[    0.087477] buck5: 1800 <--> 3300 mV at 3200 mV

[    0.088225] ldo1: 800 <--> 3300 mV at 3200 mV

[    0.088978] ldo2: 800 <--> 3300 mV at 3200 mV

[    0.090140] ldo3: 3000 mV

[    0.090758] ldo4: 800 <--> 3300 mV at 3200 mV

[    0.091309] ldo5: 800 <--> 3300 mV at 1800 mV

[    0.091861] dvref: 3000 mV

[    0.091992] lpsr: 1800 mV

[    0.092522] wled: at 0 mV 0 <--> 25 mA at 0 mA

[    0.093360] i2c i2c-0: IMX I2C adapter registered

[    0.093940] i2c i2c-1: IMX I2C adapter registered

[    0.094175] i2c i2c-2: IMX I2C adapter registered

[    0.094273] pps_core: LinuxPPS API ver. 1 registered

[    0.094281] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.094303] PTP clock support registered

[    0.094606] MIPI CSI2 driver module loaded

[    0.094670] Advanced Linux Sound Architecture Driver Initialized.

[    0.095288] cfg80211: Calling CRDA to update world regulatory domain

[    0.095307] cfg80211: World regulatory domain updated:

[    0.095314] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[    0.095323] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[    0.095331] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[    0.095340] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[    0.095347] cfg80211:   (5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A, 3000 mBm)

[    0.095354] cfg80211:   (5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)

[    0.096527] pureg-dummy: no parameters

[    0.097119] Switching to clocksource mxc_timer1

[    0.104749] NET: Registered protocol family 2

[    0.105346] TCP established hash table entries: 4096 (order: 3, 32768 bytes)

[    0.105423] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[    0.105467] TCP: Hash tables configured (established 4096 bind 4096)

[    0.105513] TCP: reno registered

[    0.105524] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    0.105542] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    0.105735] NET: Registered protocol family 1

[    0.105972] RPC: Registered named UNIX socket transport module.

[    0.105983] RPC: Registered udp transport module.

[    0.105989] RPC: Registered tcp transport module.

[    0.105995] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.106205] Trying to unpack rootfs image as initramfs...

[    0.152758] Freeing initrd memory: 744K (c3800000 - c38ba000)

[    0.153102] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

[    0.153611] ldo2p5-dummy: no parameters

[    0.154249] Bus freq driver module loaded

[    0.154493] persistent_ram: no valid data in buffer (sig = 0x41470244)

[    0.154513] persistent_ram: no valid data in buffer (sig = 0x40474244)

[    0.154534] persistent_ram: no valid data in buffer (sig = 0x03444871)

[    0.154999] console [pstore-1] enabled

[    0.155007] pstore: Registered ramoops as persistent store backend

[    0.155017] ramoops: attached 0x100000@0x9bf00000, ecc: 0/0

[    0.155030] mxc_ramoops device success loaded

[    0.155464] futex hash table entries: 256 (order: -1, 3072 bytes)

[    0.155498] audit: initializing netlink socket (disabled)

[    0.155537] type=2000 audit(0.140:1): initialized

[    0.160536] VFS: Disk quotas dquot_6.5.2

[    0.160676] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.161889] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    0.162516] NFS: Registering the id_resolver key type

[    0.162566] Key type id_resolver registered

[    0.162577] Key type id_legacy registered

[    0.162614] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

[    0.163065] fuse init (API version 7.22)

[    0.163409] msgmni has been set to 995

[    0.166691] io scheduler noop registered

[    0.166709] io scheduler deadline registered

[    0.166750] io scheduler cfq registered (default)

[    0.173202] Serial: IMX driver

[    0.173474] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX

[    0.948334] console [ttymxc0] enabled

[    0.952436] 2034000.serial: ttymxc2 at MMIO 0x2034000 (irq = 60) is a IMX

[    0.959614] imx6sl-pinctrl 20e0000.iomuxc: pin MX6SL_PAD_SD1_DAT4 already requested by 20e0000.iomuxc; cannot claim for 2038000.serial

[    0.971750] imx6sl-pinctrl 20e0000.iomuxc: pin-145 (2038000.serial) status -22

[    0.979001] imx6sl-pinctrl 20e0000.iomuxc: could not request pin 145 on device 20e0000.iomuxc

[    0.987551] imx-uart 2038000.serial: Error applying setting, reverse things back

[    0.995014] 2038000.serial: ttymxc3 at MMIO 0x2038000 (irq = 61) is a IMX

[    1.002270] serial: Freescale lpuart driver

[    1.007441] HALL_SENSOR: Probe is called heisenberg_hall_probe:452

[    1.013723] HALL_SENSOR: Probe is called heisenberg_hall_probe:473

[    1.020161] input: heisenberg_hall.17 as /devices/soc0/heisenberg_hall.17/input/input0

[    1.028702] imx sema4 driver is registered.

[    1.037522] brd: module loaded

[    1.042974] loop: module loaded

[    1.046180] bt_pwrctrl_init called..

[    1.049823]

[    1.049823] bt_reset pin obtained is 51

[    1.055331]

[    1.055331] bt_dev_wake pin obtained is 138

[    1.061030]

[    1.061030] bt_host_wake pin obtained is 93

[    1.066719] IRQ# for BT HOST WAKE: 253

[    1.070605] bt_pwrctrl_probe probe successful

[    1.076610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.083434] usbcore: registered new interface driver usb-storage

[    1.090299] imx6sl-pinctrl 20e0000.iomuxc: pin MX6SL_PAD_EPDC_PWRCOM already requested by 20e0000.iomuxc; cannot claim for 2184000.usb

[    1.102440] imx6sl-pinctrl 20e0000.iomuxc: pin-56 (2184000.usb) status -22

[    1.109346] imx6sl-pinctrl 20e0000.iomuxc: could not request pin 56 on device 20e0000.iomuxc

[    1.117808] imx_usb 2184000.usb: Error applying setting, reverse things back

[    1.129073] usb_gadget_state_work: gadget state: not attached

[    1.577175] imx_usb 2184000.usb: vbus is error

[    1.581638] imx_usb 2184000.usb: Error occurs during detection: -22

[    1.588425] mousedev: PS/2 mouse device common for all mice

[    1.599702] bd7181x-rtc bd7181x-rtc: rtc core: registered bd7181x-rtc as rtc0

[    1.607319] bd7181x-rtc probe time: 121:0:27-15:29:17:

[    1.612947] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1

[    1.621386] i2c /dev entries driver

[    1.625414] bd7181x-power bd7181x-power: battery_cycle = 0

[    1.631601] Status Register 1 == 0x0

[    1.635598] Status Register 2 == 0x0

[    1.639607] Status Register 3 == 0x40

[    1.643682] Status Register 4 == 0x0

[    1.647684] Status Register 5 == 0xb0

[    1.651756] Status Register 6 == 0x0

[    1.655738] Status Register 7 == 0x0

[    1.659738] Status Register 8 == 0x2

[    1.663722] Status Register 9 == 0x0

[    1.667725] Status Register 10 == 0x0

[    1.671796] Status Register 11 == 0x0

[    1.675868] Status Register 12 == 0x0

[    1.682351] errflags = 1

[    1.684893] bit0 is set

[    1.687362] [RESET REASONS]: SOFTWARE_RESTART: Software Shutdown



[    1.708802] input: bd7181x-power as /devices/soc0/soc.2/2100000.aips-bus/21a0000.i2c/i2c-0/0-004b/bd7181x-power/input/input1

[    1.721242] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) imx2_wdt.base=0xe09f0000 base pa:0x20bc000 imx2_wdt.clk=0xd800c100

[    1.735702] cpuidle: using governor ladder

[    1.739927] cpuidle: using governor menu

[    1.743925] sdhci: Secure Digital Host Controller Interface driver

[    1.750145] sdhci: Copyright(c) Pierre Ossman

[    1.754548] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.764567] mmc1: no vqmmc regulator found

[    1.768724] mmc1: Not allowing HS200

[    1.772332] mmc1: no vmmc regulator found

[    1.817171] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using DMA

[    1.827583] mmc0: no vqmmc regulator found

[    1.831695] mmc0: Not allowing HS200

[    1.835280] mmc0: no vmmc regulator found

[    1.877165] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using DMA

[    1.886066] usbcore: registered new interface driver usbhid

[    1.891694] usbhid: USB HID core driver

[    1.896074] ashmem: initialized

[    1.901446] logger: created 32K log 'log_metrics'

[    1.906293] logger: created 16K log 'log_vitals'

[    1.911084] logger: created 128K log 'log_kernel'

[    1.916081] Registering kernel log console

[    1.923172] console [klog-1] enabled

[    1.936842] NET: Registered protocol family 26

[    1.941389] Netfilter messages via NETLINK v0.30.

[    1.948247] nf_conntrack version 0.5.0 (7963 buckets, 31852 max)

[    1.956727] ctnetlink v0.93: registering with nfnetlink.

[    1.964169] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[    1.973204] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[    1.981245] xt_time: kernel timezone is -0000

[    1.987968] ip_tables: (C) 2000-2006 Netfilter Core Team

[    1.995445] arp_tables: (C) 2002 David S. Miller

[    2.003192] TCP: cubic registered

[    2.011026] NET: Registered protocol family 10

[    2.016177] ip6_tables: (C) 2000-2006 Netfilter Core Team

[    2.021753] sit: IPv6 over IPv4 tunneling driver

[    2.026862] NET: Registered protocol family 17

[    2.033456] 8021q: 802.1Q VLAN Support v1.8

[    2.037748] Key type dns_resolver registered

[    2.042254] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    2.064568] ldo5: disabling

[    2.080979] ldo4: disabling

[    2.086180] vddsoc: disabling

[    2.091214] cpu: disabling

[    2.096967] regulator-dummy: disabling

[    2.104983] imx mcc test is registered.

[    2.109359] file system registered

[    2.113729] android_usb gadget: Mass Storage Function, version: 2009/09/11

[    2.120667] android_usb gadget: Number of LUNs=1

[    2.125296]  lun0: LUN: removable file: (no medium)

[    2.132444] android_usb gadget: android_usb ready

[    2.137665] bd7181x-rtc bd7181x-rtc: setting system clock to 2021-01-27 15:29:18 UTC (1611761358)

[    2.160114] ALSA device list:

[    2.165155]   No soundcards found.

[    2.171008] Freeing unused kernel memory: 280K (c07d9000 - c081f000)

[    2.281439] mmc0: BKOPS_EN bit is not set

[    2.303662] mmc0: new high speed DDR MMC card at address 0001

[    2.309801] mmcblk0: mmc0:0001 NJ2ZMB 3.64 GiB

[    2.314438] mmcblk0boot0: mmc0:0001 NJ2ZMB partition 1 4.00 MiB

[    2.325015] type=1403 audit(1611761358.680:2): policy loaded auid=4294967295 ses=4294967295

[    2.333495] usb_gadget_state_work: gadget state: suspended

[    2.339161] mmcblk0boot1: mmc0:0001 NJ2ZMB partition 2 4.00 MiB

[    2.345194] mmcblk0rpmb: mmc0:0001 NJ2ZMB partition 3 512 KiB

[    2.360225] type=1404 audit(1611761358.710:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[    2.371802] GPT:Primary header thinks Alt. header is not at the end of the disk.

[    2.379272] GPT:1 != 7634943

[    2.382163] GPT:Alternate GPT header not at the end of the disk.

[    2.388215] GPT:1 != 7634943

[    2.391103] GPT: Use GNU Parted to correct GPT errors.

[    2.396277]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p7

[    2.403981]  mmcblk0boot1: unknown partition table

[    2.410983]  mmcblk0boot0: unknown partition table

[    2.498958] init: /init.base.rc: 96: ignored duplicate definition of service 'devicetype'

[    2.508878] init: could not import file '/init.debug.rc' from '/init.rc'

[    2.749875] init: /dev/hw_random not found

[    2.765877] init: /dev/hw_random not found

[    2.785150] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)

[    2.793852] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/system,target=/system,type=ext4)=0

[    2.804680] EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option

[    2.818592] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic

[    2.830252] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/userdata,target=/data,type=ext4)=0

[    2.840980] EXT4-fs (mmcblk0p6): Ignoring removed nomblk_io_submit option

[    2.853345] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: nomblk_io_submit

[    2.862483] fs_mgr: __mount(source=/dev/block/platform/soc0/soc.2/by-name/cache,target=/cache,type=ext4)=0

[    2.950560] selinux_android_load_policy_helper: SELinux policy on userdata not supported

[    2.971579] android_usb: already disabled

[    2.975687] ci_udc_pullup:1636 Device is in suspended state

[    2.981406] usb_gadget_state_work: gadget state: powered

[    2.986771] android_work: did not send uevent (0 0   (null))

[    3.009421] Zforce2 regulator is not enabled!                                Enabling Zforce2 touch regulator...

[    3.018579] Zforce2 touch regulator is enabled!

[    3.084643] input: zforce2 as /devices/platform/zforce2.0/input/input2

[    3.308371] FAT-fs (mmcblk0p3): Volume was not safely ejected. Run fsck to correct.

[    3.376207] mxc_epdc_eink: module license 'proprietary' taints kernel.

[    3.382840] Disabling lock debugging due to kernel taint

[    3.391570] Panel VCOM string: 2760

[    3.394919] imx_epdc_fb 20f4000.epdc: vcom_steps 128

[    3.404268] imx_epdc_fb 20f4000.epdc: EPDC version = 2.1.0

[    3.439316] android_work: did not send uevent (0 0   (null))

[    3.457233] usb_gadget_state_work: gadget state: not attached

[    3.490746] wv_file->wdh.luts & 0xC =4

[    4.950250] EPDC temperature changed from 0 to 32 [Override temp 4097].

[    5.107402] usb_gadget_state_work: gadget state: powered

[    5.201903] amazon-healthd: Disabling periodic chores and wake up of healthd.

[    5.264423] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'

[    5.278867] healthd: wakealarm_init: timerfd_create failed

[    5.285507] healthd: Could not open '/etc/monitoring.conf'

[    5.299646] android_work: sent uevent USB_STATE=CONNECTED

[    5.320177] usb_gadget_state_work: gadget state: addresssed

[    5.326943] vp: ******* running vpartition ***********

[    5.394149] init: cannot find '/system/bin/rild', disabling 'ril-daemon'

root@eanab:/ # [    5.500180] init: Warning!  Service settime needs a SELinux domain defined; please fix!

[    5.523525] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead

[    5.533411] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead

[    5.544012] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead

[    5.567516] mtp_bind_config

[    5.582230] usb_gadget_state_work: gadget state: suspended

[    5.685749] android_work: sent uevent USB_STATE=DISCONNECTED

[    5.774927] android_work: sent uevent USB_STATE=CONNECTED

[    5.787581] usb_gadget_state_work: gadget state: addresssed

[    5.890252] android_usb gadget: high-speed config #1: android

[    5.896153] usb_gadget_state_work: gadget state: configured

[    5.903757] android_work: sent uevent USB_STATE=CONFIGURED

[    5.979427] type=1400 audit(1611761362.330:4): avc:  denied  { write } for  pid=116 comm="recovery_report" name="/" dev="tmpfs" ino=1350 scontext=u:r:recovery_reporter:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0

[    6.117407] EXT4-fs (loop1): recovery complete

[    6.199519] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)

[    6.220471] vp: successfully mounted /dev/block/loop1 at /data/metrics

[    7.917428] ****LOGD_PUBLISHER****: added new subscriber LOG_DUMPER (0xb8870898)

[    7.924968] ****LOGD_PUBLISHER****: added new subscriber METRICS_SUBSCRIBER (0xb8871f90)

[    8.118660] EPDC temperature changed from 32 to 31 [Override temp 4097].

[    8.767523] ****LOGD_SUBSCRIBER****: starting LOG_DUMPER service!

[    8.977815] ****LOGD_SUBSCRIBER****: starting METRICS_SUBSCRIBER service!

[   10.957350] warning: `main' uses 32-bit capabilities (legacy support in use)

[   11.399807] ****LOGD_KERNEL_PROXY****: starting vitals proxy thread! fd 13

[   11.409209] ****LOGD_KERNEL_PROXY****: starting metrics proxy thread! fd 12

[   11.416597] ****LOGD_KERNEL_PROXY****: starting kernel proxy thread! fd 7

[   11.532964] ****LOGD_BASE****: LOG_DUMPER is successfully initialized

[   11.625809] ****LOGD_METRICS_HANDLER****: /data/metrics/dedicated.db is opened

[   11.635657] ****LOGD_BASE****: METRICS_SUBSCRIBER is successfully initialized

[   15.385490] EPDC temperature changed from 31 to 32 [Override temp 4097].

[   20.281710] healthd: battery l=95 v=4199 t=32.0 h=2 st=2 c=324 chg=au

[   21.356640] binder: 106:106 BC_REQUEST_DEATH_NOTIFICATION death notification already set

[   21.536492] acc_open

[   21.542518] acc_release

[   23.400715] dhd_module_init in

[   23.403792] dhd_module_init fw_image_unaligned=d8780000 fw_image=d8780000

[   23.464529] brcm_wlan_power: setting gpio #[47] on

[   23.637332] found wifi platform device bcmdhd_wlan

[   23.651072] dhd_module_init out

[   24.079373] mmc1: new high speed SDIO card at address 0001

[   24.129952] alloc static buf at d86c0000!

[   24.163094] F1 signature read @0x18000000=0x1531a9a6

[   24.207299] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x3

[   24.277364] DHD: dongle ram size is set to 524288(orig 524288) at 0x0

[   24.352569] wifi_platform_get_mac_addr

[   24.397287] wl_create_event_handler(): thread:wl_event_handler:28e started

[   24.404251] wl_event_handler: tsk enter, tsk = 0xd932fddc

[   24.435947] dhd_attach(): thread:dhd_watchdog_thread:28f started

[   24.463120] dhd_attach(): thread:dhd_dpc:291 started

[   24.477602] dhd_deferred_work_init: work queue initialized

[   24.499336] dhdsdio_download_code_file: download firmware '/system/vendor/firmware/fw_bcmdhd.bin' and save a copy to d8780000

[   24.728336] dhdsdio_download_code_file finished f/w download fw_image_size=354679

[   24.797843] dhdsdio_download_nvram: MAX=4096 len=906 read

[   24.803264] dhdsdio_download_nvram: MAX=4096 len=906 saved

[   24.877987] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[   24.962897] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)

[   25.044286] wifi_platform_get_mac_addr

[   25.058800] Firmware up: op_mode=0x0005, MAC=xx:xx:xx:xx:f2:e6

[   25.137767] Firmware version = wl0: Oct 21 2019 15:07:12 version 7.45.97.13 (r722985) FWID 01-c410fe51

[   25.181184] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79

[   25.219054] dhd_wlfc_init: query wlfc_mode succeed, fw_caps=0x1c

[   25.261378] dhd_wlfc_init(): wlfc_mode=0x1c, ret=0

[   25.267977] Dongle Host Driver, version 1.201.59.2 (r)

[   25.267977] Compiled in drivers/net/wireless/bcmdhd on Sep 30 2020 at 20:19:37

[   25.321490] Register interface [wlan0]  MAC: xx:xx:xx:xx:f2:e6

[   25.321490]

[   25.896407] dhd_set_suspend: Remove extra suspend setting

[   27.360051] Connecting with xx:xx:xx:xx:45:44 channel (9) ssid "REDACTED", len (8)

[   27.360051]

[   27.394408] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44

[   27.477853] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44

[   27.895890] dhd_set_suspend: Remove extra suspend setting

[   32.229790] bd7181x_rtc_set_time, rtc time set to SS:MM:HH:DD:MM:YY 0x49:0x29:0x95:0x27:0x1:0x21

[   38.733699] mtp_open

[   45.879798] wldev_set_country: set country for VN as XZ rev 990



root@eanab:/ # [   52.040346] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH_IND

[   52.049705] link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 from xx:xx:xx:xx:45:44

[   52.062039] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK

[   52.070762] cfg80211: Calling CRDA to update world regulatory domain

[   52.078888] Set country code 00 from initiator 0

[   52.100357] wldev_set_country: set country for 00 as XZ rev 990

[   52.106296] cfg80211: World regulatory domain updated:

[   52.113461] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   52.122246] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   52.134082] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   52.141933] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   52.150057] cfg80211:   (5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A, 3000 mBm)

[   52.157620] cfg80211:   (5460000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm)

[   52.409773] Connecting with xx:xx:xx:xx:45:44 channel (9) ssid "REDACTED", len (8)

[   52.409773]

[   52.483250] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44

[   52.587499] wl_bss_connect_done succeeded with xx:xx:xx:xx:45:44

[   52.646419] dhd_set_suspend: Remove extra suspend setting

↧

Kindle PW randomly restarts when using KOReader

January 28, 2021, 2:01 am

≫ Next: PW4 Before the jailbreak: Abnormal battery status

≪ Previous: KT3 Android on Kindle X Migu (KT3)?

Hi there,

I am new to kindle hacking but have followed a guide to JB my Kindle PW1 (Kindle 5th Gen) and installed (after putting latest 5.6.1.1 fw back on device):

KUAL
MR package installer

I then installed KOReader by following the official instructions (used "kindle" version).

I have some pdfs that I want to read so I have put them in my documents directory in a separate directory.

I have launcher koreader via KUAL and can open my pdfs. However, I am finding that the device is occasionally restarting at random? I have noticed that there is a koreader crash report, I am no too sure what it means but I hoped that someone might be able to help me. There are some common errors/warnings that appear everytime it is launched and there is at least one segmentation fault.

Thanks in advance

Here is the output:

---------------------------------------------

Code:

                launching...

  _  _____  ____                _

 | |/ / _ \|  _ \ ___  __ _  __| | ___ _ __

 | ' / | | | |_) / _ \/ _` |/ _` |/ _ \ '__|

 | . \ |_| |  _ <  __/ (_| | (_| |  __/ |

 |_|\_\___/|_| \_\___|\__,_|\__,_|\___|_|



 It's a scroll... It's a codex... It's KOReader!

[*] Current time: 01/28/21-08:41:58[*] Version: v2021.01



ffi.load: blitbuffer

ffi.load: SDL2

ffi.load (warning): libSDL2.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so

ffi.load (warning): libSDL2-2.0.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so.0

ffi.load (warning): libSDL2-2.0.so.0: cannot open shared object file: No such file or directory

SDL2 not loaded:        ./setupkoenv.lua:27: Not able to load dynamic library: libSDL2-2.0.so.0

01/28/21-08:41:58 INFO  initializing for device KindlePaperWhite

01/28/21-08:41:58 INFO  framebuffer resolution: {

    ["h"] = 1024,

    ["w"] = 758,

}

[ko-input] Forked off fake event generator(pid:4707).

ffi.load: libs/libmupdf.so

ffi.load: libs/libwrap-mupdf.so

ffi.load: libs/libfreetype.so.6

ffi.load: libs/libharfbuzz.so.0

01/28/21-08:41:59 INFO  ./cache/fontinfo.dat [string "./cache/fontinfo.dat"]:1: unexpected symbol near '.' initializing it

01/28/21-08:42:03 INFO  opening file ./help/quickstart-en-v2021.01.html

01/28/21-08:42:04 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-08:42:04 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-08:42:04 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

01/28/21-08:42:04 INFO  Loading plugins from directory: plugins

01/28/21-08:42:04 INFO  Plugin  plugins/autostandby.koplugin/main.lua  has been disabled.

ffi.load: sqlite3

ffi.load: libs/libzstd.so.1

01/28/21-08:42:05 INFO  Plugin  plugins/autosuspend.koplugin/main.lua  has been disabled.

01/28/21-08:42:05 INFO  Plugin  plugins/coverimage.koplugin/main.lua  has been disabled.

01/28/21-08:42:05 INFO  Plugin  plugins/autofrontlight.koplugin/main.lua  has been disabled.

01/28/21-08:42:05 INFO  Plugin  plugins/hello.koplugin/main.lua  has been disabled.

01/28/21-08:42:05 INFO  RD loaded plugin SSH at plugins/SSH.koplugin

01/28/21-08:42:05 INFO  RD loaded plugin autoturn at plugins/autoturn.koplugin

01/28/21-08:42:05 INFO  RD loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-08:42:05 INFO  RD loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-08:42:05 INFO  RD loaded plugin calibre at plugins/calibre.koplugin

01/28/21-08:42:05 INFO  CoverBrowser: setting default display modes

01/28/21-08:42:06 WARN  BookInfo cache DB schema updated from version 0 to version 20201210

01/28/21-08:42:06 WARN  Deleting existing ./settings/bookinfo_cache.sqlite3 to recreate it

01/28/21-08:42:06 INFO  RD loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin evernote at plugins/evernote.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin gestures at plugins/gestures.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin kosync at plugins/kosync.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin profiles at plugins/profiles.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin statistics at plugins/statistics.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin terminal at plugins/terminal.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin timesync at plugins/timesync.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-08:42:06 INFO  RD loaded plugin zsync at plugins/zsync.koplugin

01/28/21-08:42:10 INFO  event times are real clock time: no adjustment needed

01/28/21-08:43:19 INFO  no dialog left to show

01/28/21-08:43:19 INFO  quitting uimanager

lipc-wait-event exited normally with status: 0

---------------------------------------------

                launching...

  _  _____  ____                _

 | |/ / _ \|  _ \ ___  __ _  __| | ___ _ __

 | ' / | | | |_) / _ \/ _` |/ _` |/ _ \ '__|

 | . \ |_| |  _ <  __/ (_| | (_| |  __/ |

 |_|\_\___/|_| \_\___|\__,_|\__,_|\___|_|



 It's a scroll... It's a codex... It's KOReader!

[*] Current time: 01/28/21-08:45:54[*] Version: v2021.01



ffi.load: blitbuffer

ffi.load: SDL2

ffi.load (warning): libSDL2.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so

ffi.load (warning): libSDL2-2.0.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so.0

ffi.load (warning): libSDL2-2.0.so.0: cannot open shared object file: No such file or directory

SDL2 not loaded:        ./setupkoenv.lua:27: Not able to load dynamic library: libSDL2-2.0.so.0

01/28/21-08:45:55 INFO  initializing for device KindlePaperWhite

01/28/21-08:45:55 INFO  framebuffer resolution: {

    ["h"] = 1024,

    ["w"] = 758,

}

[ko-input] Forked off fake event generator(pid:5248).

ffi.load: libs/libmupdf.so

ffi.load: libs/libwrap-mupdf.so

ffi.load: libs/libfreetype.so.6

ffi.load: libs/libharfbuzz.so.0

01/28/21-08:45:58 INFO  Loading plugins from directory: plugins

01/28/21-08:45:58 INFO  Plugin  plugins/autostandby.koplugin/main.lua  has been disabled.

ffi.load: sqlite3

ffi.load: libs/libzstd.so.1

01/28/21-08:45:59 INFO  Plugin  plugins/autosuspend.koplugin/main.lua  has been disabled.

01/28/21-08:45:59 INFO  Plugin  plugins/coverimage.koplugin/main.lua  has been disabled.

01/28/21-08:45:59 INFO  Plugin  plugins/autofrontlight.koplugin/main.lua  has been disabled.

01/28/21-08:45:59 INFO  Plugin  plugins/hello.koplugin/main.lua  has been disabled.

01/28/21-08:45:59 INFO  FM loaded plugin SSH at plugins/SSH.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin calibre at plugins/calibre.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin evernote at plugins/evernote.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin gestures at plugins/gestures.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin profiles at plugins/profiles.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin statistics at plugins/statistics.koplugin

01/28/21-08:45:59 INFO  FM loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-08:46:00 INFO  FM loaded plugin terminal at plugins/terminal.koplugin

01/28/21-08:46:00 INFO  FM loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-08:46:00 INFO  FM loaded plugin timesync at plugins/timesync.koplugin

01/28/21-08:46:00 INFO  FM loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-08:46:05 INFO  event times are real clock time: no adjustment needed

01/28/21-08:46:07 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-08:46:07 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-08:46:07 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

01/28/21-08:46:08 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-08:46:08 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-08:46:08 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

ffi.load: libs/liblept.so.5

ffi.load: libs/libk2pdfopt.so.2

warning: openjpeg error: Failed to decode the codestream in the JP2 file



error: Failed to decode JPX image

warning: unrecoverable error; ignoring rest of page

01/28/21-08:52:22 INFO  opening file /mnt/us/documents/KOReader/Programming with MicroPython_ Embedded Programming with Microcontrollers and Python.pdf

ffi.load: libs/liblept.so.5

ffi.load: libs/libk2pdfopt.so.2

01/28/21-08:52:22 INFO  RD loaded plugin SSH at plugins/SSH.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin autoturn at plugins/autoturn.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin calibre at plugins/calibre.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-08:52:22 INFO  RD loaded plugin evernote at plugins/evernote.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin gestures at plugins/gestures.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin kosync at plugins/kosync.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin profiles at plugins/profiles.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin statistics at plugins/statistics.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin terminal at plugins/terminal.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin timesync at plugins/timesync.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-08:52:23 INFO  RD loaded plugin zsync at plugins/zsync.koplugin

01/28/21-08:52:23 INFO  setting zoom mode to page

ffi.load: pthread

01/28/21-08:52:44 INFO  no dialog left to show

01/28/21-08:52:44 INFO  quitting uimanager

lipc-wait-event exited normally with status: 0

---------------------------------------------

                launching...

  _  _____  ____                _

 | |/ / _ \|  _ \ ___  __ _  __| | ___ _ __

 | ' / | | | |_) / _ \/ _` |/ _` |/ _ \ '__|

 | . \ |_| |  _ <  __/ (_| | (_| |  __/ |

 |_|\_\___/|_| \_\___|\__,_|\__,_|\___|_|



 It's a scroll... It's a codex... It's KOReader!

[*] Current time: 01/28/21-08:53:17[*] Version: v2021.01



ffi.load: blitbuffer

ffi.load: SDL2

ffi.load (warning): libSDL2.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so

ffi.load (warning): libSDL2-2.0.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so.0

ffi.load (warning): libSDL2-2.0.so.0: cannot open shared object file: No such file or directory

SDL2 not loaded:        ./setupkoenv.lua:27: Not able to load dynamic library: libSDL2-2.0.so.0

01/28/21-08:53:18 INFO  initializing for device KindlePaperWhite

01/28/21-08:53:18 INFO  framebuffer resolution: {

    ["h"] = 1024,

    ["w"] = 758,

}

[ko-input] Forked off fake event generator(pid:6838).

ffi.load: libs/libmupdf.so

ffi.load: libs/libwrap-mupdf.so

ffi.load: libs/libfreetype.so.6

ffi.load: libs/libharfbuzz.so.0

01/28/21-08:53:21 INFO  Loading plugins from directory: plugins

01/28/21-08:53:21 INFO  Plugin  plugins/autostandby.koplugin/main.lua  has been disabled.

ffi.load: sqlite3

ffi.load: libs/libzstd.so.1

01/28/21-08:53:21 INFO  Plugin  plugins/autosuspend.koplugin/main.lua  has been disabled.

01/28/21-08:53:21 INFO  Plugin  plugins/coverimage.koplugin/main.lua  has been disabled.

01/28/21-08:53:22 INFO  Plugin  plugins/autofrontlight.koplugin/main.lua  has been disabled.

01/28/21-08:53:22 INFO  Plugin  plugins/hello.koplugin/main.lua  has been disabled.

01/28/21-08:53:22 INFO  FM loaded plugin SSH at plugins/SSH.koplugin

01/28/21-08:53:22 INFO  FM loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-08:53:22 INFO  FM loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-08:53:22 INFO  FM loaded plugin calibre at plugins/calibre.koplugin

01/28/21-08:53:22 INFO  FM loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin evernote at plugins/evernote.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin gestures at plugins/gestures.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin profiles at plugins/profiles.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin statistics at plugins/statistics.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin terminal at plugins/terminal.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin timesync at plugins/timesync.koplugin

01/28/21-08:53:23 INFO  FM loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-08:53:25 INFO  event times are real clock time: no adjustment needed

01/28/21-08:53:27 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-08:53:27 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-08:53:27 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

01/28/21-08:53:33 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-08:53:33 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-08:53:33 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

01/28/21-08:54:06 INFO  no dialog left to show

01/28/21-08:54:06 INFO  quitting uimanager

lipc-wait-event exited normally with status: 0

Segmentation fault

---------------------------------------------

                launching...

  _  _____  ____                _

 | |/ / _ \|  _ \ ___  __ _  __| | ___ _ __

 | ' / | | | |_) / _ \/ _` |/ _` |/ _ \ '__|

 | . \ |_| |  _ <  __/ (_| | (_| |  __/ |

 |_|\_\___/|_| \_\___|\__,_|\__,_|\___|_|



 It's a scroll... It's a codex... It's KOReader!

[*] Current time: 01/28/21-09:07:10[*] Version: v2021.01



ffi.load: blitbuffer

ffi.load: SDL2

ffi.load (warning): libSDL2.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so

ffi.load (warning): libSDL2-2.0.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so.0

ffi.load (warning): libSDL2-2.0.so.0: cannot open shared object file: No such file or directory

SDL2 not loaded:        ./setupkoenv.lua:27: Not able to load dynamic library: libSDL2-2.0.so.0

01/28/21-09:07:11 INFO  initializing for device KindlePaperWhite

01/28/21-09:07:11 INFO  framebuffer resolution: {

    ["h"] = 1024,

    ["w"] = 758,

}

[ko-input] Forked off fake event generator(pid:3400).

ffi.load: libs/libmupdf.so

ffi.load: libs/libwrap-mupdf.so

ffi.load: libs/libfreetype.so.6

ffi.load: libs/libharfbuzz.so.0

01/28/21-09:07:15 INFO  Loading plugins from directory: plugins

01/28/21-09:07:15 INFO  Plugin  plugins/autostandby.koplugin/main.lua  has been disabled.

ffi.load: sqlite3

ffi.load: libs/libzstd.so.1

01/28/21-09:07:16 INFO  Plugin  plugins/autosuspend.koplugin/main.lua  has been disabled.

01/28/21-09:07:16 INFO  Plugin  plugins/coverimage.koplugin/main.lua  has been disabled.

01/28/21-09:07:16 INFO  Plugin  plugins/autofrontlight.koplugin/main.lua  has been disabled.

01/28/21-09:07:16 INFO  Plugin  plugins/hello.koplugin/main.lua  has been disabled.

01/28/21-09:07:16 INFO  FM loaded plugin SSH at plugins/SSH.koplugin

01/28/21-09:07:16 INFO  FM loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-09:07:16 INFO  FM loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-09:07:16 INFO  FM loaded plugin calibre at plugins/calibre.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin evernote at plugins/evernote.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin gestures at plugins/gestures.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin profiles at plugins/profiles.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin statistics at plugins/statistics.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin terminal at plugins/terminal.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin timesync at plugins/timesync.koplugin

01/28/21-09:07:17 INFO  FM loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-09:07:33 INFO  event times are real clock time: no adjustment needed

01/28/21-09:07:52 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_66_Medium_Italic.ttf>

01/28/21-09:07:52 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_75_Bold.ttf>

01/28/21-09:07:52 ERROR failed to register crengine font: cannot register font </usr/java/lib/fonts/Caecilia_LT_76_Bold_Italic.ttf>

ffi.load: libs/liblept.so.5

ffi.load: libs/libk2pdfopt.so.2

01/28/21-09:08:24 WARN  got error waiting for events: Waiting for input failed: 4



01/28/21-09:10:09 INFO  opening file /mnt/us/documents/KOReader/Programming with MicroPython_ Embedded Programming with Microcontrollers and Python.pdf

ffi.load: libs/liblept.so.5

ffi.load: libs/libk2pdfopt.so.2

01/28/21-09:10:11 INFO  RD loaded plugin SSH at plugins/SSH.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin autoturn at plugins/autoturn.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin calibre at plugins/calibre.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin evernote at plugins/evernote.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin gestures at plugins/gestures.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin kosync at plugins/kosync.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin profiles at plugins/profiles.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin statistics at plugins/statistics.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin terminal at plugins/terminal.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin timesync at plugins/timesync.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-09:10:11 INFO  RD loaded plugin zsync at plugins/zsync.koplugin

01/28/21-09:10:11 INFO  setting zoom mode to page

01/28/21-09:10:11 INFO  setting zoom mode to pagewidth

01/28/21-09:10:29 INFO  no dialog left to show

01/28/21-09:10:29 INFO  quitting uimanager

lipc-wait-event exited normally with status: 0

---------------------------------------------

                launching...

  _  _____  ____                _

 | |/ / _ \|  _ \ ___  __ _  __| | ___ _ __

 | ' / | | | |_) / _ \/ _` |/ _` |/ _ \ '__|

 | . \ |_| |  _ <  __/ (_| | (_| |  __/ |

 |_|\_\___/|_| \_\___|\__,_|\__,_|\___|_|



 It's a scroll... It's a codex... It's KOReader!

[*] Current time: 01/28/21-09:10:57[*] Version: v2021.01



ffi.load: blitbuffer

ffi.load: SDL2

ffi.load (warning): libSDL2.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so

ffi.load (warning): libSDL2-2.0.so: cannot open shared object file: No such file or directory

ffi.load: libSDL2-2.0.so.0

ffi.load (warning): libSDL2-2.0.so.0: cannot open shared object file: No such file or directory

SDL2 not loaded:        ./setupkoenv.lua:27: Not able to load dynamic library: libSDL2-2.0.so.0

01/28/21-09:10:57 INFO  initializing for device KindlePaperWhite

01/28/21-09:10:57 INFO  framebuffer resolution: {

    ["w"] = 758,

    ["h"] = 1024,

}

[ko-input] Forked off fake event generator(pid:5008).

ffi.load: libs/libmupdf.so

ffi.load: libs/libwrap-mupdf.so

ffi.load: libs/libfreetype.so.6

ffi.load: libs/libharfbuzz.so.0

01/28/21-09:11:01 INFO  Loading plugins from directory: plugins

01/28/21-09:11:01 INFO  Plugin  plugins/autostandby.koplugin/main.lua  has been disabled.

ffi.load: sqlite3

ffi.load: libs/libzstd.so.1

01/28/21-09:11:01 INFO  Plugin  plugins/autosuspend.koplugin/main.lua  has been disabled.

01/28/21-09:11:01 INFO  Plugin  plugins/coverimage.koplugin/main.lua  has been disabled.

01/28/21-09:11:02 INFO  Plugin  plugins/autofrontlight.koplugin/main.lua  has been disabled.

01/28/21-09:11:02 INFO  Plugin  plugins/hello.koplugin/main.lua  has been disabled.

01/28/21-09:11:02 INFO  FM loaded plugin SSH at plugins/SSH.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin calibre at plugins/calibre.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin evernote at plugins/evernote.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin gestures at plugins/gestures.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin profiles at plugins/profiles.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin statistics at plugins/statistics.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin terminal at plugins/terminal.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin timesync at plugins/timesync.koplugin

01/28/21-09:11:02 INFO  FM loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-09:11:17 INFO  event times are real clock time: no adjustment needed

01/28/21-09:11:18 INFO  opening file /mnt/us/documents/KOReader/Beginning C++ Programming.pdf

ffi.load: libs/liblept.so.5

ffi.load: libs/libk2pdfopt.so.2

01/28/21-09:11:19 INFO  RD loaded plugin SSH at plugins/SSH.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin autoturn at plugins/autoturn.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin backgroundrunner at plugins/backgroundrunner.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin batterystat at plugins/batterystat.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin calibre at plugins/calibre.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin coverbrowser at plugins/coverbrowser.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin docsettingtweak at plugins/docsettingtweak.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin evernote at plugins/evernote.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin gestures at plugins/gestures.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin goodreads at plugins/goodreads.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin keepalive at plugins/keepalive.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin kosync at plugins/kosync.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin movetoarchive at plugins/movetoarchive.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin newsdownloader at plugins/newsdownloader.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin perceptionexpander at plugins/perceptionexpander.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin profiles at plugins/profiles.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin qrclipboard at plugins/qrclipboard.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin readtimer at plugins/readtimer.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin send2ebook at plugins/send2ebook.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin statistics at plugins/statistics.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin systemstat at plugins/systemstat.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin terminal at plugins/terminal.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin texteditor at plugins/texteditor.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin timesync at plugins/timesync.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin wallabag at plugins/wallabag.koplugin

01/28/21-09:11:19 INFO  RD loaded plugin zsync at plugins/zsync.koplugin

01/28/21-09:11:19 INFO  setting zoom mode to page

01/28/21-09:11:19 INFO  setting zoom mode to pagewidth

01/28/21-09:11:41 INFO  setting zoom mode to page

ffi.load: pthread

01/28/21-09:23:21 INFO  no dialog left to show

01/28/21-09:23:21 INFO  quitting uimanager

lipc-wait-event exited normally with status: 0

↧

PW4 Before the jailbreak: Abnormal battery status

January 28, 2021, 7:01 am

≫ Next: Booklery from Firmware ?

≪ Previous: Kindle PW randomly restarts when using KOReader

Hello,

I've kept my PW4 on 5.12.4 ever since I've read the kind, capable folks here had found a jailbreak method, and having just now discovered that it's gone public, I'm trying my hand at jailbreaking.

After flashing the diags firmware, my PW4 is showing the following message:

[Text Status] Abnormal battery status.

I was only able to find another instance of this message, a post by @skstrobel

My PW4 still has a few months left on its warranty, so I'm guessing a replacement is a realistic possibility if indeed there is some problem.

Before I proceed, how can I tell whether there's anything wrong with Kindle's battery?

↧

Booklery from Firmware ?

January 28, 2021, 7:29 am

≫ Next: New battery not charging pass ~13% K3

≪ Previous: PW4 Before the jailbreak: Abnormal battery status

Good Day,
I know I can download Bookerly here , but this is not the same version as on the newest Firmware. The official font in version 1.0.10 contains version 1.0.0 as "LCD" font, version 1.0.2 is the same as in 1.0.10 but with less glyphs.

I do own a Kindle, so I renamed all fonts and compared them on device. The internal font is distinctivly different from the web download

↧

New battery not charging pass ~13% K3

January 29, 2021, 5:40 am

≫ Next: KT3 Older G000K9 firmware downgrade?

≪ Previous: Booklery from Firmware ?

I have had the Kindle 3rd Gen, the one with the keyboard at the bottom, for about 10 years. After many years of it being forgotten in a shelf I decided to start using it again about 3 months back. Needless to say that the battery was gone and the kindle was stuck in the low battery screen.

I purchased a new battery of eBay, https://www.ebay.com/itm/293380358743 , and replaced the old one with the new.

After the swap the Kindle continued to be stuck on the low battery screen. I tried all the possible resets, long charging stints and kubrick and nothing seemed to work at the time. Until one day for no apparent reason it came back to live.

The problem I have now is that anytime I disconnect the Kindle from the charger it gives a low battery message. And the message reappears every now and then whilst reading.

I tried to install updates but I am not able to, when i click on "Settings - Settings - Update" i get a message that reads the "battery level is too low to install the update".

I tried Kubrick again and the Kindle came back but is still exhibiting the same behavior.

I have enabled diagnostics mode by creating a blank file named ENABLE_DIAGS in the root directory and under the power menu I can see the battery capacity at 11%-13% even after a 15 hour charging stint. Battery voltage reads 3662. I have removed the battery and measured the voltage with a multimeter and reads 4.1v. It doesnt matter how long i leave the KIndle charging it never goes past those same values.

Anything else I could try? Any suggestions on what I could do?

↧

KT3 Older G000K9 firmware downgrade?

January 29, 2021, 8:23 am

≫ Next: K3 Bricked K3 stuck in bootloop

≪ Previous: New battery not charging pass ~13% K3

Hello, so I have a KT3 (i think) running firmware 5.12.5.
I'm a bit lost in all the information available so I'm asking here
From what I saw, paperwhites are jailbreakable on the firmware I'm running, but this being an older model I couldn't find any definite answers. Is it still possible to jailbreak? Or if the firmware is too new, can I downgrade to a supported firmware? I'm keeping it in airplane mode so I don't mess it up further.

↧

K3 Bricked K3 stuck in bootloop

January 30, 2021, 11:37 am

≫ Next: K5 Vocabulary Builder for Kindle Touch

≪ Previous: KT3 Older G000K9 firmware downgrade?

Hi everyone,

I have a big trouble flashing Kindle 3. I've bought a K3 with a broken screen. Replaced screen with a brand new ED060SCE display. Than it occured that this reader restarts every minute or less. With a fully charged battery it stayed turned on for 30 minutes, now only rebooting. I tried flashing with Kubrick but it only flashes 1% and shows flashing done. I have few questions

1. Could it be battery isue?
2. How long it should stay in downloader mode ? Because it leaves downloader mode after minute.
3. What can I do more?

↧

K5 Vocabulary Builder for Kindle Touch

January 30, 2021, 11:59 pm

≫ Next: KV charging issue at long-term usage

≪ Previous: K3 Bricked K3 stuck in bootloop

Does it exist? I couldn't find it in last 5.3.7.3 update.

↧

KV charging issue at long-term usage

January 31, 2021, 5:48 am

≫ Next: PW4 keep battery at 50% in long-term usage

≪ Previous: K5 Vocabulary Builder for Kindle Touch

Hello,
there is a problem occured during working on my alarm clock project (see other thread).
To my Voyage I have connected an USB-Speaker and a power connector with a y-otg-cable.

There are three files in filesystem (/sys/devices/system/...) to define the USB/charging-mode:
allow_charging
charging
mode

It is no problem to get the speaker and charging simultaneous to work.
mode 10 is otg-host: usb-port is powered by the kindle, speaker works without external power connector
mode 5 is otg-gadget: kindle can be charged. (allow_charging and charging have to be set to 1)

To protect the battery I keep the battery at 50%. If it is lower, I set to 1/1/5 (allow_charging/charging/mode). If it is at 50%, I set allow_charging to 0.

Now the problem: after some time the system do not observe the to these files written values anymore. So after half a day (or two or three days..) running the clock-script, charging stops and battery drains to zero.
I have checked, whether the files are set to the correct values and tried to "reset" the charging mode by setting to 0/0/10 and then 1/1/5 again, but nothing helped.

Do anyone have an idea how to solve this problem? My unwanted workaround would be rebooting the kindle with the script of my clock in autostart (not tested yet)..

↧