Quantcast
Channel: MobileRead Forums - Kindle Developer's Corner
Viewing all articles
Browse latest Browse all 4442

PW3 Kindle doesn't start - stuck after autoboot counted to zero

$
0
0
Hi

I got an freezed Kindle from ebay.
the screen was frozen as the desciption told me, and the backlight was working.

I managed to connect the serial and the output was the following.


It was stucked after the autoboot counted down to zero
Spoiler:
U-Boot 2009.08-lab126 (Apr 15 2015 - 07:37:55)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 38 C, calibration data 0x5975155f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 06702011530500AC
S/N: G090G10553130BSC
I2C: ready
DRAM: 512 MB
Using default environment

In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 111 ms
Battery voltage: 3993 mV

Hit any key to stop autoboot: 0



output of uboot-printenv

Spoiler:
uboot > printenv
bootdelay=1
baudrate=115200
loadaddr=0x80800000
rd_loadaddr=(0x80800000 + 0x300000)
bootcmd=bootm 0x41000
failbootcmd=panic
loglevel=5
bootcmd_diags=bootm 0xE41000
bootcmd_factory=bist halt
bootcmd_fastboot=bist fastboot
stdin=serial
stdout=serial
stderr=serial
post_hotkeys=0
bootargs=

Environment size: 287/1020 bytes
uboot >


Output of uboot-idme
Spoiler:
uboot > idme
serial: G090G105XXXXXXXX
mac: 74C2XXXXXXXX
sec: OR5DKI73UMR0XXXXXXXX
pcbsn: 0670201XXXXXXXX
bootmode: main
postmode: normal


The diag mode was working I tryed to get the system working with fastboot - with no results.
as a Second method I used k1nc instruction

and copied "update_kindle_all_new_paperwhite_5.12.1.bin" via the export USB function on the kindle and updated it.
The update worked without any errors and I got the screen working - The Tree image while updating and also the Screen while the diag mode.

But it also doesn't start after the countdown.

So far these are these my recovery attempts to get the Kindle working.:blink:

Thanks for your help.

Greetings from Austria
christian

Viewing all articles
Browse latest Browse all 4442

Trending Articles