Hi.
There is a problem with the Kindle Basic screen.
The panel is not broken.
But it does not display normally.
It is displayed in black and a line as attached picture.
This is what the last line of the boot log shows.
'monitor: writing_file: file = / var / local / upstart / system.restarts: file = / var / local / upstart / system.restarts
info system_monitor: task = system, reboots = 9398 :: '
And reboot automatically.
I tried to connect the ink panel cable to another device, but the screen came out normally.
Is the motherboard chipset damaged?
Please help me.
boot log
Attachment 171236
There is a problem with the Kindle Basic screen.
The panel is not broken.
But it does not display normally.
It is displayed in black and a line as attached picture.
This is what the last line of the boot log shows.
'monitor: writing_file: file = / var / local / upstart / system.restarts: file = / var / local / upstart / system.restarts
info system_monitor: task = system, reboots = 9398 :: '
And reboot automatically.
I tried to connect the ink panel cable to another device, but the screen came out normally.
Is the motherboard chipset damaged?
Please help me.
boot log
Spoiler:
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 3996 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2957608 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.097591] boot: C def:rst:reset=watchdog
[ 0.275791] LPDDR2 MfgId: 0x3 [Elpida]
[ 0.279567]
[ 0.279569] just text: vaddr c0133fdc, va 0xc0133200 pa 0x801000c3 attr 0x6
[ 0.292037]
[ 0.292040] nmx6sl_wfi_iram: vaddr d0856000, va 0xd0856200 pa 0x904043 attr 0x2
[ 0.300898]
[ 0.300900] mx6sl_ddr: vaddr d085e000, va 0xd085e200 pa 0x905043 attr 0x2
[ 0.309232]
[ 0.309234] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.320072]
[ 0.320075] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.334422]
[ 0.334424] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.346566]
[ 0.346568] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.356919]
[ 0.356921] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.366809]
[ 0.366811] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
DEBUG:recovery-util.c:1703:setup_die_signals():Installed signal handlers.
3.0.35-lab126 #2 PREEMPT Fri Mar 22 18:08:46 UTC 2019 armv7l
[ 0.570712] Bad flash signature: 0x0
Press [ENTER] for recovery menu... 1 \BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:sy00::
info system:mounted_dev::
info milestone:8.03:49.1:49.1
info milestone:8.07:49.2:49.2
info milestone:8.10:49.3:49.3
info milestone:8.16:49.4:49.4
info milestone:8.19:49.5:49.5
info sytem:mounted_tmpfs::
info milestone:8.28:sy50:sy50
info system:start:time=8300:time=8300
info hardware:no_wan:: WiFi only device. No WAN found
info system:config:platform=wario,board=bourbon,rev=07, proto=Y,wifi=Y,wan=N:platform=wario,board=bourbon, rev=07,proto=Y,wifi=Y,wan=N
info milestone:8.45:sy51:sy51
lipc-send-event[852]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[851]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[851]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[851]: C def:dbusi::Failed to init dbus
lipc-send-event[851]: E def:open::Failed to open LIPC
lipc-send-event[851]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[852]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[852]: C def:dbusi::Failed to init dbus
lipc-send-event[852]: E def:open::Failed to open LIPC
lipc-send-event[852]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:9.33:sy99:sy99
info system:done:time=9360:time=9360
crond[868]: crond (busybox 1.28.3) started, log level 8
init.exe: sshd main process (867) terminated with status 127
init.exe: ss? main process endedini?exe: recevent pre-start proc
Welcome to Kindle!
kindle login: info milestone:9.66:sc01:sc01
info system_fs_loopbacks:mountingfs:Mounting compressed directories filesystem images:Mounting compressed directories filesystem images
info milestone:9.70:sc02:sc02
info milestone:9.74:/usr/share/X11/xkb:/usr/share/X11/xkb
info system_fs_loopbacks:mounted:Image /usr/share/X11/xkb.sqsh mounted:Image /usr/share/X11/xkb.sqsh mounted
info milestone:9.78:3:3
info milestone:9.79:sc05:sc05
info milestone:9.81:/usr/java/lib/fonts:/usr/java/lib/fonts
info system_fs_loopbacks:mounted:Image /usr/java/lib/fonts.sqsh mounted:Image /usr/java/lib/fonts.sqsh mounted
info milestone:9.85:4:4
info milestone:9.86:sc05:sc05
info milestone:9.87:/etc/kdb.src:/etc/kdb.src
info system_fs_loopbacks:mounted:Image /etc/kdb.src.sqsh mounted:Image /etc/kdb.src.sqsh mounted
info milestone:9.91:5:5
info milestone:9.92:sc05:sc05
info milestone:9.94:/usr/lib/locale:/usr/lib/locale
info system_fs_loopbacks:mounted:Image /usr/lib/locale.sqsh mounted:Image /usr/lib/locale.sqsh mounted
info milestone:9.97:6:6
info milestone:9.98:sc05:sc05
info milestone:10.00:/usr/share/keyboard:/usr/share/keyboard
info system_fs_loopbacks:mounted:Image /usr/share/keyboard.sqsh mounted:Image /usr/share/keyboard.sqsh mounted
info milestone:10.12:7:7
info milestone:10.13:sc05:sc05
info milestone:10.15:/opt/var/local:/opt/var/local
info system_fs_loopbacks:mounted:Image /opt/var/local.sqsh mounted:Image /opt/var/local.sqsh mounted
info milestone:10.19:8:8
info milestone:10.20:sc05:sc05
info milestone:10.21:sc07:sc07
info system:emiting_event:mounted_fs_loopbacks:mounted_ fs_loopbacks
debug sytem:event_emitted:mounted_fs_loopbacks:mounted_f s_loopbacks
info milestone:10.25:fs75:fs75
info system:emiting_event:loaded_modules_dependencies:l oaded_modules_dependencies
debug sytem:event_emitted:loaded_modules_dependencies:lo aded_modules_dependencies
info modules:modprobe:loading module fsl_otg_arc:loading module fsl_otg_arc
info system:emiting_event:loaded_fsl_otg_arc:loaded_fsl _otg_arc
debug sytem:event_emitted:loaded_fsl_otg_arc:loaded_fsl_ otg_arc
info modules:modprobe:loading module ehci_hcd:loading module ehci_hcd
info system:emiting_event:loaded_ehci_hcd:loaded_ehci_h cd
debug sytem:event_emitted:loaded_ehci_hcd:loaded_ehci_hc d
info modules:modprobe:loading module fuse:loading module fuse
info system:emiting_event:loaded_fuse:loaded_fuse
debug sytem:event_emitted:loaded_fuse:loaded_fuse
info hardware:no_wan:: WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:loaded_ppp_a sync
info milestone:10.55:fs00:fs00
debug sytem:event_emitted:loaded_ppp_async:loaded_ppp_as ync
info system:emiting_event:loaded_fakekey:loaded_fakekey
info filesystems_keys:not applicable for this device type::
debug sytem:event_emitted:loaded_fakekey:loaded_fakekey
info filesystems_var_local:DB PARAMS:FreePageSize:2048 bytes. AvailableSpaceInVarLocal:46643 KB.:FreePageSize:2048 bytes. AvailableSpaceInVarLocal:46643 KB.
info milestone:10.79:fs23:fs23
info system:emiting_event:mounted_varLocal:mounted_varL ocal
debug sytem:event_emitted:mounted_varLocal:mounted_varLo cal
info milestone:10.85:fs25:fs25
info milestone:10.88:vi00:vi00
[ 11.113887] Zforce2 touch regulator is enabled!
info prereg:PRAGMA_QUICK_CHECK_PASSED:: sts=0
warn display:update:No panel attached!:No panel attached!
info userstore:run:time=11320,action=start:time=11320,a ction=start
info userstore:start:found_bootup_flag:found_bootup_fla g Found BOOTUP flag file
crit system_monitor:job=display,sts=1,sig=:hard-reboot in 20 seconds:hard-reboot in 20 seconds
info zforce2:start:version=1.0b0r8:version=1.0b0r8
info zforce2:update:getfw=wario_1.0b0r8.hex:getfw=wario _1.0b0r8.hex
info system:emiting_event:loaded_touch:loaded_touch
debug sytem:event_emitted:loaded_touch:loaded_touch
info system:emiting_event:mounted_userstore:mounted_use rstore
debug sytem:event_emitted:mounted_userstore:mounted_user store
info milestone:14.66:fs50:fs50
info milestone:14.73:fs90:fs90
info milestone:14.85:fs99:fs99
info monitor:writing_file:file=/var/local/upstart/system.restarts:file=/var/local/upstart/system.restarts
info system_monitor:task=system,reboots=9398::
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 57 ms
Battery voltage: 3996 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2957608 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.097591] boot: C def:rst:reset=watchdog
[ 0.275791] LPDDR2 MfgId: 0x3 [Elpida]
[ 0.279567]
[ 0.279569] just text: vaddr c0133fdc, va 0xc0133200 pa 0x801000c3 attr 0x6
[ 0.292037]
[ 0.292040] nmx6sl_wfi_iram: vaddr d0856000, va 0xd0856200 pa 0x904043 attr 0x2
[ 0.300898]
[ 0.300900] mx6sl_ddr: vaddr d085e000, va 0xd085e200 pa 0x905043 attr 0x2
[ 0.309232]
[ 0.309234] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[ 0.320072]
[ 0.320075] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.334422]
[ 0.334424] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.346566]
[ 0.346568] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.356919]
[ 0.356921] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.366809]
[ 0.366811] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
DEBUG:recovery-util.c:1703:setup_die_signals():Installed signal handlers.
3.0.35-lab126 #2 PREEMPT Fri Mar 22 18:08:46 UTC 2019 armv7l
[ 0.570712] Bad flash signature: 0x0
Press [ENTER] for recovery menu... 1 \BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:sy00::
info system:mounted_dev::
info milestone:8.03:49.1:49.1
info milestone:8.07:49.2:49.2
info milestone:8.10:49.3:49.3
info milestone:8.16:49.4:49.4
info milestone:8.19:49.5:49.5
info sytem:mounted_tmpfs::
info milestone:8.28:sy50:sy50
info system:start:time=8300:time=8300
info hardware:no_wan:: WiFi only device. No WAN found
info system:config:platform=wario,board=bourbon,rev=07, proto=Y,wifi=Y,wan=N:platform=wario,board=bourbon, rev=07,proto=Y,wifi=Y,wan=N
info milestone:8.45:sy51:sy51
lipc-send-event[852]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[851]: W def:lipc:method=LipcOpenEx service=com.lab126.hal:Method has been deprecated.
lipc-send-event[851]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[851]: C def:dbusi::Failed to init dbus
lipc-send-event[851]: E def:open::Failed to open LIPC
lipc-send-event[851]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[852]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[852]: C def:dbusi::Failed to init dbus
lipc-send-event[852]: E def:open::Failed to open LIPC
lipc-send-event[852]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:9.33:sy99:sy99
info system:done:time=9360:time=9360
crond[868]: crond (busybox 1.28.3) started, log level 8
init.exe: sshd main process (867) terminated with status 127
init.exe: ss? main process endedini?exe: recevent pre-start proc
Welcome to Kindle!
kindle login: info milestone:9.66:sc01:sc01
info system_fs_loopbacks:mountingfs:Mounting compressed directories filesystem images:Mounting compressed directories filesystem images
info milestone:9.70:sc02:sc02
info milestone:9.74:/usr/share/X11/xkb:/usr/share/X11/xkb
info system_fs_loopbacks:mounted:Image /usr/share/X11/xkb.sqsh mounted:Image /usr/share/X11/xkb.sqsh mounted
info milestone:9.78:3:3
info milestone:9.79:sc05:sc05
info milestone:9.81:/usr/java/lib/fonts:/usr/java/lib/fonts
info system_fs_loopbacks:mounted:Image /usr/java/lib/fonts.sqsh mounted:Image /usr/java/lib/fonts.sqsh mounted
info milestone:9.85:4:4
info milestone:9.86:sc05:sc05
info milestone:9.87:/etc/kdb.src:/etc/kdb.src
info system_fs_loopbacks:mounted:Image /etc/kdb.src.sqsh mounted:Image /etc/kdb.src.sqsh mounted
info milestone:9.91:5:5
info milestone:9.92:sc05:sc05
info milestone:9.94:/usr/lib/locale:/usr/lib/locale
info system_fs_loopbacks:mounted:Image /usr/lib/locale.sqsh mounted:Image /usr/lib/locale.sqsh mounted
info milestone:9.97:6:6
info milestone:9.98:sc05:sc05
info milestone:10.00:/usr/share/keyboard:/usr/share/keyboard
info system_fs_loopbacks:mounted:Image /usr/share/keyboard.sqsh mounted:Image /usr/share/keyboard.sqsh mounted
info milestone:10.12:7:7
info milestone:10.13:sc05:sc05
info milestone:10.15:/opt/var/local:/opt/var/local
info system_fs_loopbacks:mounted:Image /opt/var/local.sqsh mounted:Image /opt/var/local.sqsh mounted
info milestone:10.19:8:8
info milestone:10.20:sc05:sc05
info milestone:10.21:sc07:sc07
info system:emiting_event:mounted_fs_loopbacks:mounted_ fs_loopbacks
debug sytem:event_emitted:mounted_fs_loopbacks:mounted_f s_loopbacks
info milestone:10.25:fs75:fs75
info system:emiting_event:loaded_modules_dependencies:l oaded_modules_dependencies
debug sytem:event_emitted:loaded_modules_dependencies:lo aded_modules_dependencies
info modules:modprobe:loading module fsl_otg_arc:loading module fsl_otg_arc
info system:emiting_event:loaded_fsl_otg_arc:loaded_fsl _otg_arc
debug sytem:event_emitted:loaded_fsl_otg_arc:loaded_fsl_ otg_arc
info modules:modprobe:loading module ehci_hcd:loading module ehci_hcd
info system:emiting_event:loaded_ehci_hcd:loaded_ehci_h cd
debug sytem:event_emitted:loaded_ehci_hcd:loaded_ehci_hc d
info modules:modprobe:loading module fuse:loading module fuse
info system:emiting_event:loaded_fuse:loaded_fuse
debug sytem:event_emitted:loaded_fuse:loaded_fuse
info hardware:no_wan:: WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:loaded_ppp_a sync
info milestone:10.55:fs00:fs00
debug sytem:event_emitted:loaded_ppp_async:loaded_ppp_as ync
info system:emiting_event:loaded_fakekey:loaded_fakekey
info filesystems_keys:not applicable for this device type::
debug sytem:event_emitted:loaded_fakekey:loaded_fakekey
info filesystems_var_local:DB PARAMS:FreePageSize:2048 bytes. AvailableSpaceInVarLocal:46643 KB.:FreePageSize:2048 bytes. AvailableSpaceInVarLocal:46643 KB.
info milestone:10.79:fs23:fs23
info system:emiting_event:mounted_varLocal:mounted_varL ocal
debug sytem:event_emitted:mounted_varLocal:mounted_varLo cal
info milestone:10.85:fs25:fs25
info milestone:10.88:vi00:vi00
[ 11.113887] Zforce2 touch regulator is enabled!
info prereg:PRAGMA_QUICK_CHECK_PASSED:: sts=0
warn display:update:No panel attached!:No panel attached!
info userstore:run:time=11320,action=start:time=11320,a ction=start
info userstore:start:found_bootup_flag:found_bootup_fla g Found BOOTUP flag file
crit system_monitor:job=display,sts=1,sig=:hard-reboot in 20 seconds:hard-reboot in 20 seconds
info zforce2:start:version=1.0b0r8:version=1.0b0r8
info zforce2:update:getfw=wario_1.0b0r8.hex:getfw=wario _1.0b0r8.hex
info system:emiting_event:loaded_touch:loaded_touch
debug sytem:event_emitted:loaded_touch:loaded_touch
info system:emiting_event:mounted_userstore:mounted_use rstore
debug sytem:event_emitted:mounted_userstore:mounted_user store
info milestone:14.66:fs50:fs50
info milestone:14.73:fs90:fs90
info milestone:14.85:fs99:fs99
info monitor:writing_file:file=/var/local/upstart/system.restarts:file=/var/local/upstart/system.restarts
info system_monitor:task=system,reboots=9398::
Attachment 171236